Taiwan Yongsheng Electric Hoist | Shanghai Yongsheng Electric Hoist | Nationwide delivery

Taiwan Yongsheng Electric Hoist | Shanghai Yongsheng Electric Hoist | Nationwide Delivery
When installing the braking device part of the lifting height of Taiwan Yongsheng Electric Hoist, pay attention to the good meshing between the ratchet tooth groove and the pawl claw, and the spring is against the pawl. The control should be flexible and reliable. After installing the hand chain wheel, rotate the hand chain wheel clockwise to press the ratchet and friction plate against the brake seat. Rotate the hand chain wheel counterclockwise. There should be a gap between the ratchet wheel and the friction plate.
. The rollers of the left and right bearings of the lifting sprocket of Taiwan's Yongsheng electric hoist can be adhered with butter to the inner ring of the bearing that has been pressed onto the journal of the lifting sprocket, and then installed into the outer ring of the bearing on the wall panel.
The test loads of Taiwan Yongsheng electric hoist are: ., 3,
Whose lifting height is marked: .,
The minimum distance between the two hooks of Taiwan Yongsheng electric hoist are:, 3 , 3, 3,
The hand pulling forces of Taiwan Yongsheng electric hoist when fully loaded are:, 3, 3, 3,
The number of lifting chain rows of Taiwan Yongsheng electric hoist is: /, /, < br/>The round steel diameter of Taiwan Yongsheng electric hoist lifting chain is:
The net weight of Taiwan Yongsheng electric hoist is:.,.,.,.,.,3.,