Wood impregnation tank Wood carbonization tank Wood vacuum pressurized tank

Wood impregnation tanks are suitable for various types of wood preservative/wood flame retardant/wood staining/wood degreasing and other treatments. The equipment unit is a special equipment used for anti-corrosion, anti-mildew, anti-moth, anti-termite, flame retardant and dyeing of bamboo and wood products for outdoor gardens, landscapes, villas and interior decoration. It has the advantages of wide applicability, good processing effect, large capacity, reasonable layout, safety and reliability. This unit not only saves labor, but also significantly improves the quality of wood processing. The equipment is designed in accordance with national standards. It can protect wood according to the full cell method, high and low frequency pressure method, double vacuum method and other wood protection processes at the same time or separately. The working pressure of the equipment is:., working temperature: -℃, vacuum degree ( Relative):., the wood that can be preservative treated at one time ranges from /can -/can. The company's newly developed wood anti-corrosion equipment control system is a brand-new intelligent control system for wood protection equipment, which makes the operation of the equipment simpler, safer and more reliable. And it can accurately measure the amount of pharmaceutical absorbed by each cubic meter of wood. The wood can test whether the amount of pharmaceutical absorbed by the wood meets the standard requirements without leaving the tank.
1. Production process procedure:
. According to the process production needs, prepare the medicinal liquid in the storage tank for later use
. Select the materials according to the product specifications and plan them on all sides and load them into the material truck to open the tank door. Push the moving platform to connect with the inside of the tank, push the material truck into the tank, close the tank door, vacuum operation, suction liquid, replenish liquid, pressurize frequently, relieve pressure, return liquid, vacuum pressure relief, open the tank door (after the pressure is relieved), discharge inspection.
2. Operation sequence: vacuum impregnation, pressure and vacuum drying.
3. Usage method:
. Full cell method: Full cell method is also called total absorption method. It is a preservative process that fills wood cells with preservatives. Usually suitable for water-soluble preservatives (such as, ), treating wood with this method can allow the wood to retain the maximum amount of preservatives.
. High and low frequency pressing method: The process of preservative treatment of wood using repeated normal pressure and pressure cycles is called high and low frequency pressing method. Using this process to treat wood can make difficult-to-impregnate wood and wet wood Obtain better antiseptic effect than full cell method. Typically, wood will be immersed to a deeper depth. This is a wood preservative process with better wood preservative effect and is recommended.
4. Precautions:
Before working, be sure to check whether all electrical appliances are intact, whether valves, pressure gauges, vacuum gauges, liquid level gauges, and various pumps are normal. If they are damaged, repair them. replace.
During the heating and pressurizing process, it is necessary to gradually heat and pressurize, and pay attention to pressure changes, and must not exceed the specified working pressure in the tank.