Year1
- 规格：
- 8米
- 材质：
- 不锈钢
- 型号：
- MW014
1. Overview
The portable remote control car blocker is composed of high-performance reinforced plastic blocks and stainless steel deflation hollow needles. It adopts an electromechanical integrated remote control device to operate It is simple, safe and reliable, and can be set up at any time for mobile deployment without affecting the smooth flow of normal roads. It is an indispensable advanced equipment for relevant law enforcement departments when they need to set up cards to intercept suspect vehicles.
2. How to use
Before use, ensure that the battery in the remote control box is charged for enough time to keep the voltage of the power supply between.
. On the road section where the interception task is required, open the right side cover of the roadblock packaging box, roll out the roadblock roll, remove the elastic hook used to fix the roadblock, lean against the side of the roadside, and roll to the direction you want to intercept. Road surface for vehicles.
Connect the wiring between the remote control and the roadblock head. Insert one end of the two-meter three-core connection cable into the roadblock head connection jack and the other end into the three-core connection jack on the remote control box.
. Open the upper cover of the remote control box, pull the power switch to the built-in power supply, the power indicator light turns on, and the device enters the working state. Pull out the left receiving antenna and raise it to increase the receiving distance.
When it is necessary to intercept the suspect's vehicle, press the big button on the upper end of the remote control, and the stainless steel hollow needles in the roadblock will automatically stand up. At this time, if you forcefully pass through the roadblock, several stainless steel needles will be pierced into the wheel. A punctured hollow tire will deflate the tire immediately within two seconds, making it impossible to continue driving and can only stop.
After the interception mission is completed, press the small button at the lower end of the remote control, and the erected stainless steel hollow needle will rotate back to its original position and enter the standby state.
To recycle the remote-controlled vehicle blocking roadblock, roll the roadblock block into a round shape and secure it with elastic hook straps. Turn off the power switch of the remote control box and put the remote control box into the space in the middle of the roadblock block and hold it with your left hand. Open the roadblock box body, roll the roadblock block into the box with your right hand, put in the connecting cable, and fasten the box cover.
This remote control roadblock is also equipped with an external power connection cable. When the power supply voltage in the remote control box is insufficient and cannot work normally, one end of the connection cable can be inserted into the external power connection jack of the remote control box and the other end into the car. To use the cigarette lighter jack, pull out the power switch of the remote control box to the external power supply position. The operation is the same as above.
, Work indicator light
Power indicator light - When the remote control roadblock needs to perform interception tasks, turn on the power switch in the remote control box, and the power indicator light will turn on.
Under-voltage indicator light When the power supply voltage in the remote control box is lower than the voltage, the under-voltage indicator light lights up. At this time, it needs to be charged. The charging indicator lights up during charging, and the charging time is - hours.
Red work light
When the remote-controlled vehicle blocking roadblock is in the intercepting working state, the two red indicators above the remote control box light up, indicating that the interception task is over, turn off the power, and the indicator lights stop working.
, Main technical indicators
Effective length of roadblock: length, width and thickness 3
Working voltage:
Effective remote control distance of remote control: (open area)
Remote control speed: times/ Seconds
Deflation hollow steel needle:
Weight:
Packing box volume:
Load bearing:
3. Precautions
When using , it is strictly forbidden to use hand, kick or step on the roadblock blocks to avoid damaging the roadblock or causing the operator to be stabbed by the erected stainless steel hollow needles.
After each task is completed, the shortage of stainless steel hollow needles or other parts should be replaced in time.
Do not disassemble the connecting parts of the equipment at will. If repair or adjustment is needed, please contact the supplier or manufacturer
This remote-controlled car roadblock has a general waterproof function. Please do not leave it in the rain for a long time. Use in snowy or muddy conditions.
The above tire breaker straps have two appearances: (all black or black and yellow)
WhatsApp
