Factory direct supply to Beijing and Tianjin construction safety ladder road and bridge construction ladder manufacturer price

规格：

2438*1268

Hebei Hengshui Xinyuan Construction Equipment Factory is a professional manufacturer of safety ladders for road and bridge construction, high heading ladders, heading column ladders, bridge construction and other products. The company has accumulated many years of technical experience. Our company produces The safety ladder has high safety and is simple to operate. Welcome new and old customers to negotiate.
Installation and usage instructions:
The installation and erection of safety ladders requires qualified professionals (working at heights). Before construction, the foundation should be treated, a suitable working surface should be found, the adjustable base should be placed on the suitable working surface, the vertical pole should be inserted after adjusting the level, and the first-floor horizontal brace should be installed. Pay attention to placing the horizontal brace in the lowest pin warehouse of the vertical pole. Install the plug of the horizontal bar into the pin magazine of the vertical pole, adjust the balance and tighten the insert. At this time, measure the diagonal size of the frame, as well as the horizontality of the horizontal bar and the verticality of the vertical bar. If the deviation exceeds the Knock the insert loose and adjust it to the appropriate size, then tighten the insert. In order to ensure the safety of construction workers, each floor of the pin warehouse must be equipped with cross bars or horizontal braces. Ladders are placed on the cross braces for construction workers to pass up and down. Handrails must be installed on the inside of the ladder and diagonal rods for safety ladders must also be installed on all sides. To enhance the stability of the entire frame. When connecting a long pole, you must use * screws to tighten the connecting holes of the upper and lower poles to ensure safety. The main members of the safety ladder frame must be firmly connected to the embedded parts of the building every meter (choose appropriate attachments based on the overall height), (firmly connected to the building entity), and the maximum erection height of conventional products must not exceed meters. .