- 1:
- 1
- 1:
- 1
- 1:
- 1
The silicon core layer on the inner wall is a solid, permanent lubricant
The silicon core layer on the inner wall is synchronously extruded into the high-density polyethylene pipe wall and evenly distributed throughout. The inner wall of the pipe will not peel or detach, and has the same lifespan as the silicon pipe
The silicon core layer on the inner wall has the same physical and mechanical properties as high-density polyethylene
The friction characteristics of the silicon core layer on the inner wall remain unchanged Change, the cable can be extracted repeatedly in the pipeline
The silicon core layer on the inner wall does not react with water, and the pipeline can be flushed with water after an accident.
Product specifications and application scope:
Silicon core tube specification table
Optical cable outer diameter
The following
Silicon tube inner diameter
Outside of optical cable Diameter
Silicon tube inner diameter
Wall thickness: The minimum wall thickness of silicon tube is , and the maximum is . If special requirements are required for wall thickness, it can also be produced. The most commonly used thicknesses are 3., 3., .
Length: / The factory standard coil length of the silicon tube is, / The coil length of the silicon tube is, / The coil length of the silicon tube is 3. If the customer has special needs, it can be shipped in a longer (any length) length under conditions of convenient transportation and operation.
Color: You can choose any solid color, or you can inlay vertical stripes of other colors on a solid-color silicon tube.
Manufacturer’s free contact information and free ordering website: Mobile phone number 3-:3.b