Xi'an Swinger manufacturer directly supplies tile adhesive and tile adhesive

Base treatment
(yuan/ton)
Make sure the substrate is strong and flat, without hollows, and the substrate surface is clean and free of oil stains, release agents, floating dust and loose objects and other stains. For highly absorbent base layers, moisten them with clean water.
Technical parameters
, Adhesion performance:

Bonding strength
Pressure shear strength
British B standard

British B Standard

Ceramic tile~Concrete





, Aging resistance:
Conditions
Days at room temperature
Days after immersion in water
Days after heat and humidity test
Days after freeze-thaw times
Bonding strength





Construction technology
Take out the adhesive powder from the plastic bucket, pour clean cold water into the bucket, and reach the assembly line marked on the bucket body. (The amount of water added per kilogram of bagged binder is approximately . liter)
Pour the binder powder into the bucket and stir with an electric mixer until it is even and free of lumps.
First use a special scraper to apply a full batch of mortar to the base surface 3-thickness, and then use the toothed side of the scraper to pull out stripes in a straight line or shape (the plane of the scraper and the plane of the base intersect to form a degree to degree, it is recommended Use scrapers with different tooth depths according to the size of the tiles).
The ceramic tiles do not need to be soaked in water. They only need to be pasted on the wall or floor in order and compacted.
. The position of the tiles can be adjusted within the specified time to achieve the best effect. Please remove excess glue before the glue dries.
Applicable environment
Indoor, outdoor, wall, floor, pool, bathroom, kitchen, cold areas.
Notes
Generally, bricks do not need to be soaked in water. For ceramic tiles or base layers with strong water absorption, soak them in water for a few minutes or spray water to moisten them first.
. The initial strength is low. Heavy load on the ceramic tile surface should be avoided to achieve the use strength.
Anti-freeze type is available in winter and can be constructed within -℃.
Storage and transportation
The packaging specification of this product is/bag.
Store in a cool and dry place. Pay attention to moisture-proof, moisture-proof and sun-proof during storage and transportation. The storage period is one month.