Aolite color mosaic brick powder

This product is a cement-based dry powder material specially developed for paving and caulking materials such as ceramic mosaics, glass, paper bricks, and microcrystalline stones. Pasting and caulking can be carried out at the same time during construction, saving materials, labor and time. The product is delicate, has long-lasting color, has good impermeability and anti-aging properties, and does not peel or fall off when exposed to moisture or water. [Product Features]
●The adhesive brick powder has a certain thixotropy and is easy to construct. Pasting and caulking can be completed at one time, saving time and speed.
●Has good water resistance and anti-aging properties.
●With mold blocking technology, it can be mold-free for a long time.
●Various colors make the decorative effect of veneer panels more perfect.
●Low dosage, high effectiveness.
●Thick or thin bottom layers can be constructed.
●Reduce the phenomenon of surface contamination such as slurry return and tears, and improve the waterproof and anti-seepage ability of the wall.
[Scope of application]
● Various types of small and medium-sized paper tiles, glass tiles, mosaics, and antique tiles can be pasted on cement-based interior and exterior walls and floors.
[Construction Technology]
◆ Base surface treatment
The base surface should be firm, flat, and clean, with curing agent and release agent. The smoother concrete surface needs to be roughened before construction, and the leveling layer and the curing period of the concrete base surface should meet the requirements.
◆ Mixing
Powder and liquid. ~ Pour clean water into the bucket according to the proportion, then slowly add the powder, use an electric mixer to stir into a uniform, particle-free glue, and let it sit for a while Let it mature for about ~ minutes before stirring briefly before use.
◆Construction method
Use a scraper to apply the glue on the back of the tile/mosaic. When applying, pay attention to filling the joints of the tile/mosaic, and then use a toothed spatula to apply the glue on the back of the tile/mosaic. On the base surface, tap the tile/mosaic surface with a scraper after a few minutes and compact it.
◆
Post-processing
After the pasting construction is completed, about an hour later (it may be adjusted appropriately depending on changes in temperature, humidity, etc. at the construction site), use a brush dipped in water to wet the tiles /For the paper couplets on the front of the mosaic, peel off the paper after the paper couplets are fully moistened, check whether the brick joints are full of grout, and repair individual defective areas. About an hour after peeling off the paper, use a slightly damp towel or sponge to polish the glue in the tile joints, as appropriate. After drying, use a clean wet towel to clean the entire tile/mosaic surface.
[Reference dosage]
●The dosage will be adjusted according to the size of the facing material. The dosage for pasting mosaic is about ./~./.
【Notes】
◆
Before construction, the verticality and flatness of the base surface must be confirmed.
◆
The suitable construction temperature is ℃~℃. When constructing on rainy days, sheltering and protective measures must be taken, and make sure that it is not exposed to rain, exposure to the sun and frost for at least 1 hour after construction.
◆
If the base surface is too dry or absorbs water too quickly before construction, the wall surface should be wetted in advance until there is no clear water.
◆
The base surface heated by the sun should be cooled with water. Low temperature will extend and high temperature will shorten the usable time of wet glue.
◆
This product is weakly alkaline and will irritate the skin. Necessary protective measures should be taken during use.
[Storage and Transportation]
◆
This product should be stored off the ground on a pallet in a ventilated and dry place. It should be prevented from being soaked by rain and moisture, and should be prevented from overlapping layers, otherwise the product may be damaged. Premature failure. During transportation, they should be protected from the sun, rain and cold, be carefully stacked, and pay attention to prevent packaging damage.
◆
Store in a cool and dry place. The shelf life of unopened products is one month.
[Statement]
Our company guarantees that the quality of manufactured products complies with relevant national requirements and specifications, but does not assume any responsibility for direct or indirect losses caused by incorrect use of this product by users.
If you have any questions, please consult the company's technical department or our local dealer.