Aolitai high elastic waterproof coating metal roof factory building waterproofing

This product is a one-component polymer emulsion waterproof coating with excellent flexibility and ductility, cold construction and green environmental protection that can be used right out of the box. It has excellent performance with base surfaces of mortar concrete, color steel plates and other materials. Adhesion, especially suitable for waterproofing and repair projects where new and old roofs are directly exposed. [Product Features]
●Extremely strong flexibility, excellent stretch rate, good adaptability to base deformation, and can resist slight cracking, vibration, expansion and contraction, and displacement of the building base.
●Construction is simple and quick, and can be used right out of the box.
●Excellent applicability, excellent adhesion to dry or wet bases such as mortar or concrete, metal structures, calcium silicate boards, gypsum boards, etc.
●Unique formula system, outstanding outdoor durability and UV resistance.
●Green and environmentally friendly, non-toxic and tasteless.
【Scope of application】
●Especially suitable for direct exposed waterproofing or repair projects on concrete or color steel plate roofs of new and old buildings and outdoors.
●For the sealing and repair of expansion joints, separation joints, drains, and wall pipes, the effect is better after adding carcass reinforcement materials to the secondary coating.
【Construction Technology】
◆ Base Surface Treatment
Clean the base surface and remove all oil stains. For loose and porous substrates, especially cement fiber boards, etc., this product must be diluted with water, and the diluent should be used to enhance the interface bottom layer.
◆Detail processing
Before the construction of a large-area waterproof layer, paint the yin and yang corners, wall pipe roots, separation joints and other nodes first to make an additional waterproof layer (thickness not less than 100%). The yin and yang corners should be Processed into an arc shape. When using carcass reinforcement materials (such as non-woven fabrics, etc.), the carcass should be sandwiched between the coating films.
◆ Coating construction
When applying coating, it is generally applied one or more times. The thickness of each layer is preferably . Use your hand as a guide, and each brushing should be perpendicular to the previous brushing direction to achieve the best effect. When it is necessary to add carcass reinforcement material, the carcass material should be flat, wrinkle-free and soaked. The coating film under the carcass should not be smaller than the upper coating film.
◆ Surface coating
Dilute the paint slightly with water and roll it once to improve the smoothness and smoothness of the surface.
◆ Post-processing
Before the waterproof layer is completely dry, prevent water immersion, rain, exposure to sunlight, frost, sharp objects or heavy pressure from damaging the waterproof layer for ~ hours. It is forbidden to step on the waterproof layer within hours after the construction is completed. The next process can only be carried out after it is completely dry.
[Reference dosage]
●The recommended dosage is roof waterproofing (.~.) exterior facing waterproofing (.~.) bottom board moisture-proofing (.~.)/.
【Notes】
◆
It is not recommended to paste oversized stone or porcelain plates outside the waterproof layer of the internal and external walls of this product.
◆
The suitable temperature for construction is in the range of ℃~℃. It is not suitable for construction in rainy weather or when there is open water on the base layer.
◆
For tiny cracks, painting can be applied directly without repair. For larger cracks, mortar should be used to repair them first, and then waterproof coating should be applied. The effect of using matrix reinforcement materials is better. For expansion joints and grooves left at pipe roots, sealing materials should be filled first, and then waterproofing is applied. layer.
◆
This product is a water-based non-toxic product. Appropriate protective measures should be taken during use.
【Executive Standards】
This product implements standard/medium-sized technical requirements.
【Storage and Transportation】
◆
This product should be stored in a ventilated and dry place and should be protected from rain and moisture. During transportation, they should be protected from the sun, rain and cold, be carefully stacked, and pay attention to prevent packaging damage.
◆
Store in a cool and dry place. The shelf life of unopened products is one month.
[Statement]
Our company guarantees that the quality of manufactured products complies with relevant national requirements and specifications, but does not assume any responsibility for direct or indirect losses caused by incorrect use of this product by users.
If you have any questions, please consult the company's technical department or our local dealer.