Professional Sales Jiangsu Bolong Leak Plugging King

Introduction to Leak Plugging King
Leak Plugging King refers to a high-performance latest high-tech product that integrates inorganic, alkali-free, waterproof, moisture-proof, crack-proof and anti-seepage plugging. The most amazing feature is that it solidifies quickly and has a uniform density. The strength is much higher than the current high-grade concrete! It starts to solidify one minute after mixing, and finally solidifies in three to four minutes. The compressive strength can reach the above in one day, and can be directly constructed on wet base surfaces for emergency road restoration, etc. , it can be restored to its original state in one hour, and can be opened to traffic in four hours for waterproofing projects. With water and pressure, the leakage will stop immediately. The product is simple to operate. Just add water to mix and it can be used. It is non-toxic, harmless and pollution-free. Add Portland cement to adjust and slow down. Condensation time buildings have the same lifespan.
Scope of application
For non-retractable concrete or mortar structures such as kitchen and bathroom basement roofs, it can strengthen the waterproofing of the arcs of internal corners and around pipes, as well as various wall-penetrating pipes and casing surroundings. It has excellent results in repairing defects and internal corners. It can also be used to bury hooks, seal equipment railings, etc.
Main Features
This product has the function of quickly plugging water with water. The initial setting time is only two minutes and the final setting time is 15 minutes.
This product can be applied on both sides of the water surface, and is combined with the base layer to form a non-aging whole, with extremely strong water resistance.
The solidification time of this product can be adjusted arbitrarily according to user needs. The waterproof bonding is completed in one go and the bonding force is strong.
This product has no corrosion to steel bars.
This product is non-toxic, odorless, environmentally friendly and non-flammable, and can be used in drinking water projects.
Trial scope
Roof concrete flat-sloped roof, gutter, rain shed and various irregular-shaped roofs
Underground building concrete interior wall exterior wall ground elevator pit underground tunnel cable well pipe external waterproofing
Ground building bathroom kitchen roof garden reservoir
Joints expansion joints construction joints settlement joints through wall pipes and drains.
Five Usage Methods
The base layer must be clean, free of sand, loose, and hollow. The moisture content of the base layer should be within the range. The moisture content of the waterproof base layer of ground and underground buildings must be within the range before construction can be carried out. Ventilation holes should be provided at a distance of one per square meter.
The amount of material generally requires grams per square meter, and the thickness is meters. The scraping should be uniform in batches, and the up and down scraping directions should be crosswise. The interval between each time depends on the construction environment and the degree of curing of the coating film. It is generally not less than an hour and is subject to a non-stick feel. According to the design requirements, one or more layers can also be applied.
Coating film protection In order to extend the service life of the waterproof layer and ensure the quality of the project, it is recommended to make a protective layer after the coating construction is completed. Shangren Roofing makes a protective layer of cement mortar on top of the coating film.
Six Precautions
Do not let the coating film be exposed to rain before it is cured, and it is prohibited for people to walk or perform other operations
During construction, it is strictly prohibited to come into contact with open flames and water
The shelf life is one month at normal temperature. .