Aolitai flexible waterproof coating (two-component) kitchen and bathroom balcony garage basement waterproof home waterproofing

This product is a two-component acrylic polymer-modified polymer cement-based waterproof coating. It has excellent waterproof properties and forms a tight and solid waterproof layer with the mortar and concrete base to prevent water penetration, thereby achieving excellent waterproof effects. Its remarkable flexibility can withstand slight vibrations of the building and the resulting micro cracks, and can fill the micro cracks. [Product Features]
●Strong adhesion, wide application range, can be directly applied to a variety of base materials, and is suitable for long-term water-soaked areas.
●Excellent flexibility, able to adapt to slight vibrations of the building and micro-cracks due to various reasons, and can cover cracks no larger than 30 mm.
●The anti-penetration and waterproofing effect is excellent. It can penetrate into the base surface to form a tough and seamless elastic waterproof membrane with good aging resistance.
[Scope of application]
●Especially suitable for parts that have been exposed to water or moisture for a long time, with small displacement of the base layer, or for local waterproofing treatment, such as around pipe mouths, yin and yang corners, kitchens, bathrooms, interior and exterior walls, and floors. , drainage pipes, etc.
●Suitable for all types of base surface waterproofing projects composed of concrete, mortar, etc.
[Construction Technology]
◆ Base surface treatment
The base surface should be solid, flat, and clean. Obvious pores should be blocked and smoothed with cement mortar. Before construction, the base surface should be moistened until there is no clear water. . The yin and yang angles should be arc-shaped, the diameter of the yin and yang angles should be larger than that of the yin and yang angles, and the diameter of the yin and yang angles should be larger than that of the yin and yang angles. Oil stains must be removed, and low and damaged areas must be repaired.
◆ Mixing and Stirring
Pour the emulsion into the container according to the ratio of powder to liquid, stir it slightly, then slowly add the powder, stir thoroughly with a low-speed electric mixer, let it stand for ~ minutes, and then add a little Stir and use. Intermittent stirring should be maintained during use to mix the glue evenly and prevent precipitation.
◆Construction method
Use a brush or roller brush to apply the paint on the base surface. Apply the paint in batches according to the thickness required by the construction. Details such as yin and yang corners, pipe roots, etc. should be painted multiple times. Underground projects It is advisable to lay a layer of carcass reinforcement material. The construction time should be ~ hours each time (appropriately adjusted depending on changes in temperature, humidity, etc. at the construction site, and should be extended in winter), and the paint should be applied in the vertical direction to ensure that there is no leakage, and the single thickness should not exceed .
◆ Post-processing
It is forbidden to step on the waterproof layer within hours after the construction is completed. The next process can only be carried out after it is completely dry. Generally, it takes ~ days to completely dry. Pools that have been filled with water for a long time should wait until they have been vacant for several weeks before filling them with water.
[Reference dosage]
●When the base surface is flat and the thickness of the waterproof layer is , the dosage is approximately ./~./.
【Notes】
◆
The suitable temperature for construction is within the range of ℃~℃. It is not suitable for construction in rainy weather outdoors or when there is open water on the base layer.
◆
In places where the air is particularly humid and there is no ventilation, ventilation equipment should be used to speed up the drying of the waterproof coating. Otherwise, the surface of the film may turn white after it dries, but this does not affect the waterproof performance.
◆
For tiny cracks, painting can be applied directly without repair. For larger cracks, they should be repaired with mortar first, and then painted with waterproof coating. The effect of using carcass reinforcement materials is better. For expansion joints and grooves left at pipe roots, sealing materials should be filled first, and then the waterproof layer should be applied.
◆
When used in areas where people walk on it or are exposed to the sun and water for a long time, the waterproof layer needs to be protected, such as mortar, concrete or ceramic tiles.
◆
This product is weakly alkaline and may irritate the skin. During use, necessary protective measures should be taken.
【Executive Standards】
This product implements national standards/medium-sized technical requirements.
[Storage and Transportation]
◆
This product should be stored off the ground on a pallet in a ventilated and dry place. It should be protected from rain and moisture, and should be prevented from overlapping layers, otherwise the product may be damaged. Premature failure. During transportation, they should be protected from the sun, rain and cold, be carefully stacked, and pay attention to prevent packaging damage.
◆
Store in a cool and dry place. The shelf life of unopened products is one month.
[Statement]
Our company guarantees that the quality of manufactured products complies with relevant national requirements and specifications, but does not assume any responsibility for direct or indirect losses caused by incorrect use of this product by users.
If you have any questions, please consult the company's technical department or our local dealer.