Aolitai roof waterproofing expert (two-component) roof waterproofing building roof waterproofing

This product is a two-component polymer cement-based waterproof coating specifically designed for overall waterproofing construction of concrete structure roofs. It has good affinity for concrete and mortar and can form a tight and permanent bond with it to prevent water penetration. , thereby achieving excellent waterproofing effect. [Product Features]
●Pliable and highly elastic, with high elongation, able to withstand slight vibrations of the building and micro-cracks due to various reasons.
●Strong adhesion, excellent anti-seepage and waterproof effect, simple and quick construction.
[Scope of application]
●Especially suitable for overall waterproofing projects on horizontal and sloped concrete structure roofs.
[Construction Technology]
◆ Base surface treatment
The base surface should be solid, flat, and clean. Obvious pores should be blocked and smoothed with cement mortar. Before construction, the base surface should be moistened until there is no clear water. . The yin and yang angles should be arc-shaped, the diameter of the yin and yang angles should be larger than that of the yin and yang angles, and the diameter of the yin and yang angles should be larger than that of the yin and yang angles. Oil stains must be removed, and low and damaged areas must be repaired.
◆ Mixing and Stirring
Pour the emulsion into the container according to the ratio of powder to liquid, stir it slightly, then slowly add the powder, stir thoroughly with a low-speed electric mixer, and let it sit for a few minutes before stirring again. It can be used later. Intermittent stirring should be maintained during use to mix the glue evenly and prevent precipitation.
◆Construction method
Use a brush or roller brush to apply the paint on the base surface. Apply the paint in batches according to the thickness required by the construction. Details such as yin and yang corners, pipe roots, etc. should be painted multiple times. Underground projects It is advisable to lay a layer of carcass reinforcement material. The construction time should be ~ hours each time (appropriately adjusted depending on changes in temperature, humidity, etc. at the construction site, and should be extended in winter), and the paint should be applied in the vertical direction to ensure that there is no leakage, and the single thickness should not exceed .
◆ Post-processing
It is forbidden to step on the waterproof layer within hours after the construction is completed. The next process can only be carried out after it is completely dry. Generally, it takes ~ days to completely dry. Pools that have been filled with water for a long time should wait until they have been vacant for several weeks before filling them with water.
[Reference dosage]
●When the base surface is flat and the thickness of the waterproof layer is , the dosage is approximately ./~./.
【Notes】
◆
The suitable temperature for construction is within the range of ℃~℃. It is not suitable for construction in rainy weather outdoors or when there is open water on the base layer.
◆
For tiny cracks, painting can be applied directly without repair. For larger cracks, they should be repaired with mortar first, and then painted with waterproof coating. The effect of using carcass reinforcement materials is better. For expansion joints and grooves left at pipe roots, sealing materials should be filled first, and then the waterproof layer should be applied.
◆
When used in areas where people walk on it or are exposed to the sun and water for a long time, the waterproof layer needs to be protected, such as mortar, concrete or ceramic tiles.
◆
This product is weakly alkaline and may irritate the skin. During use, necessary protective measures should be taken.
【Executive Standards】
This product implements national standards/medium-sized technical requirements.
[Storage and Transportation]
◆
This product should be stored in a ventilated and dry place and should be protected from rain and moisture, otherwise the product may fail prematurely. During transportation, they should be protected from the sun, rain and cold, be carefully stacked, and pay attention to prevent packaging damage.
◆
Store in a cool and dry place. The shelf life of unopened products is one month.
[Statement]
Our company guarantees that the quality of manufactured products complies with relevant national requirements and specifications, but does not assume any responsibility for direct or indirect losses caused by incorrect use of this product by users.
If you have any questions, please consult the company's technical department or our local dealer.