Aolitai super strong adhesive for vitrified tiles

This product is a combination of high-quality inorganic cementitious materials, refined graded aggregates, various imported chemical additives and imported polymer emulsions. It is an adhesive specially designed for the paving of low water absorption vitrified tiles. A new type of super flexible adhesive that greatly simplifies construction and reduces labor costs. 【Product Features】
●Super strong adhesion and flexibility, no shrinkage, and excellent sagging resistance.
●No need to soak bricks into wet walls, construction is convenient and quick.
●Excellent anti-efflorescence performance to prevent surface contamination.
●Used directly for pasting large ceramic tiles and stones on cement-based surfaces, and can replace dry-hanging stones.
[Scope of application]
Specifically suitable for pasting vitrified tiles with low water absorption and other ceramic tiles on cement-based base surfaces.
[Construction Technology]
◆ Base Surface Treatment
The base surface should be firm, flat, clean, free of pollution, loose objects, hollows, etc., and free from curing agents, oil stains and other contaminants. The base surface needs to be roughened before construction. For renovated walls, ensure that the old decorative materials are firmly adhered.
◆ Mix and stir
powder and liquid.~ Pour water first according to the proportion, then add the powder, use an electric mixer to stir into a uniform, particle-free glue. If left to stand for about a minute, it will mature. Stir slightly to increase the strength.
◆Construction method
It is advisable to use a toothed spatula (the size of the spatula teeth can also be changed according to the size of the tiles) to scrape and comb the glue layer, applying for about 10 minutes each time, so that it can be evenly distributed into a full layer. Continuous stripes. If it is used for ceramic tiles with deep grooves, a toothed scraper should also be used to apply glue on the back of the brick to ensure that the glue is fully adhered.
[Reference dosage]
◆
Use a toothed scraper to paste small and medium-sized ceramic tiles. The dosage is about ./~./.
◆
Use a toothed scraper to paste large ceramic tiles. The dosage is about ./~./.
◆
When using the full-laying method for construction, the dosage should be adjusted depending on the size of the tiles, the flatness of the base surface, and the verticality. The specific dosage is approximately /~/.
[Notes]
◆
The suitable construction temperature is ℃~℃. When construction in rainy days, shielding and protective measures must be taken, and make sure not to use water for at least 1 hour after filling. Exposure to rain, sun exposure and frost.
◆
You can only step in or fill in the joints one hour after the paving is completed.
◆
Before pasting on old ceramic tiles or stone surfaces, as well as gypsum boards and other base surfaces, the original adhesion strength of the base surface and the firmness of the wall must be confirmed. A bonding test must be conducted before large-area construction. reuse.
◆
When pasting large tiles and stones, it is advisable to apply tile adhesive evenly on the back of the tiles and stones to enhance the stickiness.
◆
This product is weakly alkaline and may irritate the skin. During use, necessary protective measures should be taken.
【Executive Standards】
This product implements the technical requirements of standards/.
[Storage and Transportation]
◆
This product should be stored off the ground on a pallet in a ventilated and dry place. It should be prevented from being soaked by rain and moisture, and should be prevented from overlapping layers, otherwise the product may be damaged. Take effect too early. During transportation, they should be protected from the sun, rain and cold, be carefully stacked, and pay attention to prevent packaging damage.
◆
Store in a cool and dry place. The shelf life of unopened products is one month.
[Statement]
Our company guarantees that the quality of manufactured products complies with relevant national requirements and specifications, but does not assume any responsibility for direct or indirect losses caused by incorrect use of this product by users. If you have any questions, please consult the company's technical department or our local dealer.
If you have any questions, please consult the company's technical department or our local dealer.