Modified epoxy resin steel adhesive structural adhesive directly supplied from Shaanxi manufacturer

-Structural adhesive/modified epoxy resin steel adhesive
Usage:
(
yuan/)
. Used to strengthen the surface of steel plates and beams and columns. Construction to increase load capacity.
. Used for the reinforcement construction of pasting the cracks of various components.
3. Used for the pasting construction of relevant building components, building materials, and decoration materials such as brackets, stairs, and stones on the edge of sidewalks.
Product features:
． High adhesion, good toughness and excellent impact resistance
. Good thixotropy and easy construction
3. Stable curing and low colloid shrinkage
. After curing, it can adapt to the highest temperature and the lowest temperature Temperature-
Technical parameters:
． Colloidal properties
Tensile strength
Compressive strength
Flexural strength
Tensile modulus of elasticity
3


3

． Bonding ability
Steel-steel tensile
Steel-steel bond
Steel-steel uneven
Steel-concrete positive tension
After 1 hour moist heat aging, steel- Percentage reduction in steel tensile shear strength ()
Shear strength
Tensile strength
Tear-off strength
Bonding strength

3

3. (Cohesive failure of concrete)


Construction:
． Long-term storage of materials and materials B will cause precipitation, stratification, and discoloration, which will not affect the basic performance and quality of the product. Just stir evenly before use
． Mix thoroughly according to the ratio of material: material B and it can be used
3. Construction temperature +℃, use temperature after curing +~-℃
. Construction time: At +℃, the operation time is about 3 minutes, it can be cured in an hour, and it can be loaded, stressed, and used after 3 days
. Reference dosage: about -kg/square meter
Packaging and storage:
． (+)kg/barrel (.3+3.)kg/barrel (3+)kg/barrel,
． Separately sealed and stored in -℃ environment, shelf life is months