Olitai renovated tile adhesive

This product is a dry powder material composed of high-quality inorganic cementitious materials, refined graded aggregates, fillers and various imported chemical additives. It can effectively reduce the phenomenon of efflorescence, is easy and fast to construct, and is low-cost and high-efficiency. It is especially suitable for pasting new tiles on old walls. After mixing with water, the tiles can be pasted directly on the old tiles. 【Product Features】
●Low dosage, high effectiveness.
●High and low temperature resistance, anti-aging, acid and alkali resistance.
●There is no need to soak bricks into wet walls, which significantly improves work efficiency and makes construction convenient and quick.
●It has extremely strong adhesion to hard-to-stick surfaces such as old ceramic tiles, old water-based paint, and smooth stone.
●High bonding strength and excellent anti-falling effect.
●Thick or thin bottom layers can be constructed.
●Reduce surface contamination such as slurry return and tears.
【Scope of application】
●Renovate and paste various types of ceramic tiles on stable old walls and floors.
●Paste various types of ceramic tiles, mosaics, and antique tiles on cement-based interior and exterior walls and floors.
[Construction Technology]
◆ Base surface treatment
The renovated wall should be smooth and clean, and the old decorative materials should be firmly adhered.
◆ Ingredient ratio
Mix the powder and water according to the ratio.
◆ Mixing and Stirring
Pour the water into the bucket first, then slowly add the powder, use an electric mixer to stir into a uniform, particle-free slurry, let it sit for a while to mature for about ~ minutes, then stir slightly. use.
◆Construction method
It is advisable to use a toothed spatula to apply the adhesive directly to the old wall, scrape and comb the adhesive layer, applying for about 10 minutes each time, so that it is evenly distributed into full and continuous stripes, and then Just knead the tiles on top and ensure that the tiles are fully adhered to the base surface.
[Reference dosage]
●Use a toothed scraper, the dosage is about ./~./.
●Use a toothed scraper and the dosage is about ./~./.
●Use a toothed scraper and the dosage is about ./~./.
●Use a toothed scraper and the dosage is about ./~./.
●When using the full-laying method for construction, the dosage should be adjusted depending on the size of the tiles, the flatness of the base surface, and the verticality. The specific dosage is approximately /~/.
[Notes]
◆
Before applying to old ceramic tiles or stone surfaces, as well as gypsum boards and other base surfaces, the original adhesion strength of the base surface and the firmness of the wall must be confirmed. Before using the area, conduct a pasting test before use.
◆
Before construction, the verticality and flatness of the base surface must be confirmed.
◆
The suitable construction temperature is ℃~℃. When constructing on rainy days, sheltering and protective measures must be taken, and ensure that the joints are not exposed to rain, exposure, or frost for at least an hour after filling.
◆
Renewal tile glue must be applied to the base surface and the back of the tiles, and the finish must be kneaded and pressed within minutes depending on weather conditions.
◆
In order to prevent the slurry from drying out and losing its adhesive force, it is recommended that the range of application should not exceed each time.
◆
The base surface heated by the sun should be cooled with water. Low temperature will extend and high temperature will shorten the usable time of wet glue.
◆
If used for ceramic tiles with deep grooves, use a toothed scraper to apply glue on the back of the brick to ensure full slurry adhesion. When pasting large ceramic tiles and stones, it is advisable to apply tile glue evenly on the back of the ceramic tiles and stones to enhance the stickiness.
◆
This product is weakly alkaline and will irritate the skin. Necessary protective measures should be taken during use.
【Executive Standards】
This product implements the technical requirements of standards/.
[Storage and Transportation]
◆
This product should be stored off the ground on a pallet in a ventilated and dry place. It should be prevented from being soaked by rain and moisture, and should be prevented from overlapping layers, otherwise the product may be damaged. Take effect too early. During transportation, they should be protected from the sun, rain and cold, be carefully stacked, and pay attention to prevent packaging damage.
◆
Store in a cool and dry place. The shelf life of unopened products is one month.
[Statement]
Our company guarantees that the quality of manufactured products complies with relevant national requirements and specifications, but does not assume any responsibility for direct or indirect losses caused by incorrect use of this product by users.
If you have any questions, please consult the company's technical department or our local dealer.