Aolitai standard color anti-mildew caulking material caulking agent beauty caulking agent brand manufacturer direct sales

This product is a cement-based ceramic tile caulking material with a variety of colors to choose from. It is suitable for caulking on interior and exterior wall tiles, floor tiles and various stone materials. It can be used to prevent mildew and waterproofing, especially in humid locations. The phenomenon of efflorescence is the first choice for caulking and decoration of ceramic tiles, stones and other building materials.
【Product Features】
.●
The material is soft, the colors are diverse, uniform and strong.
.●
Mold-proof, aging-resistant and non-fading.
.●
Impermeable and waterproof, no efflorescence or tears.
【Scope of application】
. Suitable for indoor and outdoor wall and floor tiles with a brick joint width of ~
Song Dynasty. Can be used in kitchens, bathrooms, swimming pools and other wet places.
[Construction Technology]
.◆Substrate Treatment
The gaps and around the ceramic tiles should be clean and free of loose objects and water accumulation. For ceramic tiles with high water absorption, such as ceramic tiles and split bricks, the gaps should be fully moistened with water before filling.
.◆Mixing
.Powder and liquid
.~.Pour the water into the bucket according to the proportion, then slowly add the powder, and stir with an electric mixer until it is even and particle-free. The paste will form a paste, let it sit for a few minutes to mature, then stir slightly before use.
.◆Construction method
Use a rubber putty knife or sponge scraper to fill the gaps. The filling material must be completely pressed into the gaps without leaving any gaps. Scrape off the excess slurry and be careful to avoid The slurry in the gap is brought out. After the grouting work is completed, immediately clean the tile surface with a slightly damp rag or sponge. After the grout has dried for more than an hour, use water or tile cleaner to remove the stains on the surface of the tiles.
[Notes]
.◆
Acidic cleaners cannot be used to clean filled ceramic tiles, nor should they be used to fill expansion joints. They are not suitable for industries that require resistance to chemical substances. Filling of floor joints.
.◆
The suitable construction temperature is
宋体℃
~
宋体℃. When constructing on rainy days, shielding and protective measures must be taken, and make sure that the filling The caulking material shall not be wetted by rain within a few hours after sewing.
.◆
Caulking material may contaminate the surface of ceramic tiles, especially ceramic tiles with rough, porous and highly water-absorbent surfaces and various types of natural stone and marble. The width of the gap filled with this product should not be smaller than Song Dynasty.
.◆
This product is weakly alkaline and may irritate the skin. During use, necessary protective measures should be taken.
【Executive Standards】
.This product implements the technical requirements of the standard/
Song Dynasty (
Song Dynasty).
[Storage and Transportation]
.◆
This product should be stored off the ground on a pallet in a ventilated and dry place. It should be protected from rain and moisture, and should be prevented from being overlaid with
Arial style layers. pressure, otherwise the product may fail prematurely. During transportation, they should be protected from the sun, rain and cold, be carefully stacked, and pay attention to prevent packaging damage.
.◆
Stored in a cool and dry place, the shelf life of unopened products is
Six months.