Aolite universal tile adhesive tile adhesive manufacturer tile adhesive brand

This product is a dry powder product composed of high-quality inorganic cementitious materials, refined graded aggregates, fillers and various imported chemical additives. It is a new type of adhesive. This product has excellent resistance to cracking and resistance to cracking. It has excellent temperature deformation performance and adhesion performance, and can effectively reduce the phenomenon of efflorescence. It is simple and quick to construct and can be used by adding water. It is low-cost and high-efficiency. 【Product Features】
●High bonding strength and excellent drop resistance.
●No need to soak bricks into wet walls, construction is convenient and quick.
●Reduce the phenomenon of surface contamination such as efflorescence and tears.
[Scope of application]
Paste small and medium-sized ceramic tiles, stones, mosaics, lightweight antique bricks, slates, etc. on cement-based base surfaces.
[Construction Technology]
◆ Base Surface Treatment
The base surface should be firm, flat, clean, free of pollution, loose objects, hollows, etc., and free from curing agents, oil stains and other contaminants. The base surface needs to be roughened before construction.
◆ Mix and stir
Powder and liquid. ~ Pour water first according to the proportion, then slowly add the powder, use an electric mixer to stir into a uniform, particle-free glue, and let it stand for about a minute to mature. Stir slightly before use to increase the strength.
◆Construction method
It is advisable to use a toothed spatula (the size of the spatula teeth can also be changed according to the size of the tiles) to scrape and comb the glue layer, applying for about 10 minutes each time, so that it can be evenly distributed into a full layer. Continuous stripes. If it is used for ceramic tiles with deep grooves, a toothed scraper should also be used to apply glue on the back of the brick to ensure that the glue is fully adhered.
[Reference dosage]
◆
Use a toothed scraper, the dosage is about ./~./.
◆
Use a toothed scraper, the dosage is about ./~./.
◆
Use a toothed scraper, the dosage is about ./~./.
◆
When using the full-laying method for construction, the dosage should be adjusted depending on the size of the tiles, the flatness of the base surface, and the verticality. The specific dosage is approximately /~/.
[Notes]
◆
The suitable construction temperature is ℃~℃. When construction in rainy days, shielding and protective measures must be taken, and make sure not to use water for at least 1 hour after filling. Exposure to rain, sun exposure and frost.
◆
You can only step in or fill in the joints one hour after the paving is completed.
◆
Before pasting on old ceramic tiles or stone surfaces, as well as gypsum boards and other base surfaces, the original adhesion strength of the base surface and the firmness of the wall must be confirmed. A bonding test must be conducted before large-area construction. reuse.
◆
This product is weakly alkaline and will irritate the skin. Necessary protective measures should be taken during use.
【Executive Standards】
This product implements the technical requirements of standards/.
[Storage and Transportation]
◆
This product should be stored off the ground on a pallet in a ventilated and dry place. It should be prevented from being soaked by rain and moisture, and should be prevented from overlapping layers, otherwise the product may be damaged. Premature failure. During transportation, they should be protected from the sun, rain and cold, be carefully stacked, and pay attention to prevent packaging damage.
◆
Store in a cool and dry place. The shelf life of unopened products is one month.
[Statement]
Our company guarantees that the quality of manufactured products complies with relevant national requirements and specifications, but does not assume any responsibility for direct or indirect losses caused by incorrect use of this product by users.
If you have any questions, please consult the company's technical department or our local dealer.
.
◆
This product should be stored in a ventilated and dry place and should be protected from rain and moisture. During transportation, they should be protected from the sun, rain and cold, be carefully stacked, and pay attention to prevent packaging damage.
◆
Store in a cool and dry place. The shelf life of unopened products is one month.
[Statement]
Our company guarantees that the quality of manufactured products complies with relevant national requirements and specifications, but does not assume any responsibility for direct or indirect losses caused by incorrect use of this product by users.
If you have any questions, please consult the company's technical department or our local dealer.