Supply Swinger N-300 white, black, gray, yellow tile grouting agent

Tile jointing agent
★Application scope: Suitable for indoor and outdoor filling of ceramic tile joints with a width of -.
★Substrate treatment:
The grouting agent should be used after the tile adhesive has dried. The joints of the tiles should be clean and free of loose material.
★Notes:
*Please use up the mixed caulking agent within an hour
*Should be used at a temperature of +~+3℃
*After the caulking agent is completed Please perform hourly moisture maintenance
*The water absorption of different ceramic tile sides, the amount of water added when mixing, and the ambient temperature/humidity during use may slightly affect the color of the cured grout
* This product contains cement, which will produce an alkaline reaction when it comes in contact with water. Please pay attention to proper protection of your eyes and skin. If your skin is stained with slurry, you can rinse it with clean water. If your eyes are stained with slurry, please seek medical treatment in time. Please place it out of reach of children. Place
★Construction technology:
. Pour the entire package of colored caulking agent into an appropriate amount of clean cold water according to the following proportions, and stir until even and without lumps. One liter of water is required for every 3 kilograms of light gray caulking agent, and one liter of water is required for every 3 kilograms of other color caulking agents.
.Use a rubber-bottomed ash spoon to squeeze the mixed grouting agent into the reserved joints along the diagonal direction of the tiles.
3. After the grouting agent is initially cured, use a slightly damp sponge to clean off the excess grouting agent on the surface of the tiles.
. After an hour, use a dry cloth for further cleaning. Cured colored caulking agent is waterproof.
★
Storage: Please store in a cool and dry place. The unopened shelf life is one month.
/bag
White caulking agent yuan/ton
Colored caulking agent (black, yellow, gray) yuan/ton