Supply Huaqian TD-15 sand fixing liquid for 40 yuan/KG, factory direct sales

Sand-fixing liquid element
[Model]

[Component]
Single component
[Physical state]
Material and material B are white emulsions
[Ingredients]
Nano-scale, small molecular weight synthetic resin
[Features]
Low viscosity, can be sprayed
Water-based emulsion, available On the wet base layer
Natural color solidification, does not change the original base color
High adhesion, obvious curing and hardening effect on the base
Strong penetration, the penetration depth can reach 3~ depending on the base material Does not vary
This product is non-toxic, odorless, and does not contain formaldehyde, benzene and other volatile substances
[
Material
Uses]
Penetration reinforcement:
Repair treatment for concrete defects such as sanding, powdering, looseness, and slag dropping
Painting protection:
Anti-corrosion painting protection for ancient city walls and masonry buildings
Anti-corrosion painting Anti-mildew:
Moisture-proof protection for waterside buildings, gypsum boards, etc.
[
B material
Use]
Painting on concrete surface to enhance wear resistance
/>Brush the concrete surface to brighten it and improve the decoration
Mix it with cement and sand and use it as an anti-wear repair material
[Performance Parameters]
Implementation standards: Refer to - "Building Surface Used" Silicone Waterproofing Agent》
Huaqian Sand Solid Liquid Material
Huaqian Sand Solid Liquid Material B
Value
Minimum Film Forming Temperature
Value
Minimum Cost Membrane temperature

℃

℃

Construction temperature: It can be constructed at ambient temperatures above ℃.
Reference dosage: .kg/square meter, substrates with different densities vary greatly
[Instructions for use]
Long-term storage of this product will cause precipitation and stratification. It must be stirred well before use. .
During construction, use brushes, roller brushes, and spraying equipment to directly brush or spray this product on the surface of the base layer to be treated until the base layer no longer absorbs it.
[
Sand repair
]
The first step is penetration and sand fixation:
Directly spray and apply Huaqian sand fixing liquid material, and make the base layer fully After the base layer is completely absorbed, apply wet-on-wet for a second time to ensure that the sand-fixing liquid fully and fully penetrates the base layer. Generally, the sandy and loose concrete floor should be sprayed ~3 times. In severe cases, the number of spraying times should be increased appropriately.
The second step, defect repair:
Mix according to the weight ratio of Huaqian sand fixing liquid material/B material: ordinary Portland cement: fine sand::, stir to form a uniform mortar, and use a trowel to Apply the knife to the defective area, compact, smooth, polish, maintain and dry.
The third step, brightening and wear-resistant treatment:
For concrete floors with wear-resistant requirements, Huaqian sand solid liquid material can be used to spray the sandy and loose concrete floor for ~3 days. Then apply Huaqian Sand Fixing Liquid B on the ground. No maintenance is required. It can be used normally within 3 days after application.
[Packaging and Storage]
Kilogram/barrel, stored in ℃ environment, avoid exposure to sunlight and freezing, shelf life is 1 month.
[Application Examples]
Ancient Cliff House, Jinshanling Great Wall, Luoyang Ancient City Wall, Xi'an Ancient City Wall,
/tong, yuan/tong