Supply Swinger Z5 ceramic tiles, vitrified tiles, marble, mosaic adhesive

Type adhesive
(ceramic tiles, vitrified tiles, marble, mosaic)
★
Categories and uses
Tile adhesive: floor tile bonding and below 3*3 of wall tiles bonded. (Universal type)
Vitrified tile adhesive: bonding of floor tiles and vitrified tiles, wall tiles below *. (Enhanced type)
Marble adhesive: floor tile bonding and thin stone bonding, excellent wall tile bonding.
Mosaic adhesive: For the bonding of mosaic tiles and mosaics, this adhesive is alkaline rubber powder. It is not suitable to use this adhesive if there is mercury or paint behind the mosaic. It is recommended to use neutral glue.
★
Substrate treatment
Make sure the substrate is strong and flat, with no hollows, and the substrate surface is clean and free of oil stains, release agents, floating dust, loose objects and other stains. For highly absorbent base layers, moisten them with clean water.
★
Technical parameters
, Adhesion performance:
Bonding strength
Pressure shear strength
British B standard

United Kingdom B standard






, aging resistance:
Conditions
Room temperature
Days after immersion in water
Days after heat and humidity test
Days after freeze-thaw times
Bonding strength





★
Construction Technology
Take out the adhesive powder from the plastic barrel, pour clean cold water into the barrel, and reach the assembly line marked on the barrel. (The amount of water added per kilogram of bagged binder is approximately . liter)
Pour the binder powder into the bucket and stir with an electric mixer until it is even and free of lumps.
First use a special scraper to apply a full batch of mortar to the base surface 3-thickness, and then use the toothed side of the scraper to pull out stripes in a straight line or shape (the plane of the scraper and the plane of the base intersect to form a degree to degree, it is recommended Use scrapers with different tooth depths according to the size of the tiles).
The ceramic tiles do not need to be soaked in water. They only need to be pasted on the wall or floor in order and compacted.
. The position of the tiles can be adjusted within the specified time to achieve the best effect. Please remove excess glue before the glue dries.
★
Use environment
Indoors, outdoors, walls, floors, pools, bathrooms, kitchens, cold areas.
★
Notes
Generally, tiles do not need to be soaked in water. For ceramic tiles or base layers with strong water absorption, soak them in water for a few minutes or spray water to moisten them first.
. The initial strength is low. Heavy load on the ceramic tile surface should be avoided to achieve the use strength.
Anti-freeze type is available in winter and can be constructed within -℃.
★
Storage and transportation
The packaging specification of this product is/bag.
Store in a cool and dry place. Pay attention to moisture-proof, moisture-proof and sun-proof during storage and transportation. The storage period is one month.
This product is non-toxic, odorless, non-polluting, non-flammable and non-explosive, and can be transported as general cargo.
Ceramic tile adhesive (universal type),
yuan/ton.
Vitrified tile adhesive (reinforced type), yuan/ton.
Marble adhesive, yuan/ton.
Mosaic adhesive, yuan/ton. (/bag)