JS waterproof coating

Composite waterproof coating is a two-component waterproof material made of organic liquid materials and inorganic powders by introducing advanced technology and key raw materials. 2. Main features
The wet surface construction coating is tough and high-strength.
Adding pigments can make a colorful decorative layer.
, non-toxic, odorless, can be used for waterproofing of edible pools.
, suitable for waterproofing exterior walls and sloped roofs with facing materials. Construction on facades, slopes and top surfaces can be firmly bonded to base surfaces and facing bricks, roof tiles, cement mortar and other outer materials. .
, High temperature resistance (°C), especially suitable for waterproofing of roads and bridges.
, Adjust the mix ratio to make ceramic tile bonding materials and sealing materials.
3. Scope of application
, Industrial And roof waterproofing of civil buildings.
, toilet and bathroom, kitchen waterproofing, moisture-proof engineering.
, waterproofing of walls, basements, swimming pools, tanks, etc.
The waterproof coating is divided into Ⅰ There are two types: Type Ⅱ and Type Ⅱ, with different usage.
① Type Ⅰ is mainly used for parts with large deformation such as roofs, basements, etc.
② Type Ⅱ is mainly used for parts with small deformation such as exterior walls and toilets Bathroom, etc.
4. Technical indicators implementation standards/
Technical indicators of No. 1 project
Type
Solid content,
Surface drying time
Solid drying time< br/> Tensile strengthbr/> Elongation at break
Low temperature flexibility, ф rod ℃, no cracks
Impermeable Water permeable Impermeable
Impermeability
5. Construction method Select
Construction method Ⅰ Base coat, undercoat, top coat
Construction method Ⅱ Base base, undercoat, mid-coat, top coat
Construction method Ⅲ Basecoat, undercoat None Apply the coating on the middle layer of the textile layer
6. Construction points
The base surface must be flat, firm, clean, free of open water, leakage, unevenness and cracks, and the yin and yang corners must be leveled first. It should be made into arc angle
and accurate ingredients. For the convenience of users, our company has strictly packaged according to the proportion requirements. When using, you only need to slowly add the powder to the corresponding liquid while stirring, and stir thoroughly. to a uniform, fine, and granular-free mixture.
, coating essentials
① Apply with a roller or brush, and complete layer by layer according to the sequence of the selected construction method
② If the paint (especially (primer) should be stirred evenly at any time if there is any precipitation
③ The coating should be as uniform as possible without local deposition
④ The time interval between each layer shall be based on the previous layer of coating drying and not sticking to the hand
/> ⑤ The lower coating, non-woven fabric layer and middle coating in construction method III must be applied continuously
7. Precautions
Do not construct below ℃ or in the rain, and do not use it in a particularly humid and non-ventilated place Construction in the environment.
8. Storage, transportation and packaging
Liquid materials must be kept in a cool place above ℃, and powder materials should be placed in a dry place. Pay attention to moisture and sun protection, and the shelf life is months
. The powder of this product is packed in composite bags, and the liquid is packed in plastic barrels