K11 waterproof coating 111

Bolong waterproof coating series are high-efficiency waterproof materials designed for different substrates. They are cement-based waterproof coatings modified by acrylic high polymers. This product uses dry powder and liquid additives. After mixing, a chemical reaction occurs to form a tough elastic waterproof layer. This layer has good adhesion to the base surface, can form a tight, firm and permanent bond with it, and can inhibit Mold growth and protection from salt contamination. 2. Main features
It can be constructed on wet base surfaces, and the waterproof layer has high mechanical strength and good wear resistance.
The coating can prevent moisture and salt pollution and inhibit the growth of mold.
The concrete can still remain breathable. Since this product is cement-based, ceramic tiles, mosaics, etc. can be directly laid on the waterproof layer.
This product has two appearances: white and gray.
3. Scope of application
Used for indoor and outdoor cement concrete building structures, prefabricated concrete structures, cement plasters and brick walls and other base surfaces.
, underground parking lanes, underground tunnels, water supply and drainage pipes, floor walls and floors.
This product is non-toxic and harmless and can be directly used in drinking water reservoirs, swimming pools, fish ponds, etc.
This product is also suitable for various waterproofing projects on the front or back water surfaces.
4. Construction requirements
The base must be clean, solid, flat, dry, ash-free, and sand-free.
Pour the liquid into the prepared container in proportion, then add the powder into the liquid in proportion and stir thoroughly until the liquid and powder are dissolved.
Use a roller, gunite machine or brush to evenly roll or spray the mixed slurry onto the cement base surface. The coating should be applied all over and the thickness should be applied according to the design requirements.
The order of coating is to apply approximately 100% after the first coat, then apply the third coat in a direction perpendicular to the °C angle after the coating is dry, and so on.
. It is prohibited to step on it within hours after the construction is completed. After it is completely dry, other covering layers (such as plastering, tiling, mosaic, etc.) can be applied.
5. Technical indicators execution standards/
Serial number
Inspection items
Type
Type

Tensile strength


Elongation at break


Water impermeability
, water impermeability
, water impermeability

Drying time
Explicit drying time

6. Packaging, storage and transportation
Liquid materials must be stored in a cool place above ℃, and powder materials should be stored in a dry place. Pay attention to moisture, sun and rain protection. The shelf life of this product is one year.
. The liquid of this product is packed in plastic barrels, and the powder is packed in plastic-lined bags.
, This product is / set (kg powder + kg liquid).
7. Reference dosage and proportion
When the thickness of the waterproof layer is The product can be stored for one year.
Packaging specification (two components)
Type powder + additive (large component) powder + additive (medium component) powder + additive (small component)
Type powder +Additive (large component) powder+Additive (medium component) powder+Additive (small component)