Mahogany electric door rolling shutter door telescopic doorway gate remote control mahogany universal copy remote control

工作电压：

12v

工作电流：

10ma

遥控距离：

100米

Shenzhen Huafanyuan Electronics Co., Ltd. specializes in the production of various types of remote controls. Welcome to call us
:
WeChat:
or
:
Wangwang:
Ali Babawangpu:
:3
Specializes in the production of various brand door remote controls such as
:
Renqiu Fudi garage door series, Youmeike road gate series,
Hongmen, Yum, Weijie, Jianxing, Genesis, Duya, Alcano, Shunchang, Jingyuan, Lingda, Hengda, Zhitongda, Pacific, Tongling, Younet, Dongrong, Dongsheng, Wang Wei,
Zhongtian
, Zhongtian
, Xinmenren, Laojia
, Wright Green
, Zhongcheng, Qiancheng, New Soma , Spreit, Xu Ji, Haos
, Juguang rolling code
and other electric doors, rolling shutter doors, telescopic doors, barrier gates, sliding doors, garage doors, swing door remote controls, and also produce rolling shutter doors External motor controller, rolling shutter door tubular motor controller,

light remote control, wireless receiving and transmitting module,
copy remote control, copy remote control, dial code remote control, learning code remote control , Welding code remote control, rolling code remote control, jack remote control, foreign trade remote control, motor forward and reverse remote control, water pump remote control, anti-theft alarm remote control,
Anti-theft remote control, colorful light strip remote control, Balance car remote control,
Wait
!
. Things to note before purchasing:
., your original remote control can be used normally and can be controlled normally.
., you need to know the frequency of your remote control (3...)
., the chip of your original remote control is the type described in the description [Copyable chip models are:,,,R ,,,. 】
. Operation method:
[Code clearing] Press and hold the two buttons in the top row of the copy remote control at the same time (must be pressed at the same time to be effective). Do not let go and wait for a few seconds. The indicator light will flash quickly. After letting go and pressing the copy remote control button again, the indicator light flashes briefly and goes out, indicating that the clearing is successful.

[Copy] The two remote controls (the original remote control and the copied remote control) are as close as possible, press one of the buttons on the original remote control, and then press one of the buttons on the copied remote control. Instructions The light flashes quickly to indicate successful learning. The rest of the keys are similar.

Notes:
When copying, the antennas of the original remote control and the copied remote control cannot be next to each other.
.The place with the strongest response to the copied remote control signal is the lower left position of the remote control.
.If some buttons cannot be used after copying, you can clear the code and copy again.
.Copy each button in batches.
.Make sure your original remote control battery is fully charged when copying.
.If you delete the password by mistake, you can restore it by pressing the two buttons below the copy remote control at the same time. [B~
Copy the remote control