National direct selling rolling shutter door external motor chain machine rolling shutter door motor controller

工作电压：

220v

遥控距离：

100米

遥控频率：

433MHZ

-- :Shenzhen Huafanyuan Electronics Co., Ltd. specializes in the production of various types of remote controls. Welcome to call for consultation

WeChat:

or

< br/>
Wangwang:

Alibaba Wangpu:
, 3
. :
. -- :Specializing in the production of various brand door remote controls Appliances such as

Renqiu Fudi garage door series, Youke gate series,

Hongmen, Yum, Weijie, Jianxing, Genesis, Duya, Alcano, Shunchang, Jingyuan, Lingda, Hengda, Zhitongda, Pacific, Tongling, Younet, Dongrong, Dongsheng, Wangwei,
. -- :3 Zhongtian
. :
. -- :Zhongtian
. -- :New disciple, old model
. :
. -- :Wright Green
. -- :Zhongcheng, Qiancheng, New Soma, Spreit, Xu Ji, Hos
. :3
. -- :3, Juguang rolling code
and other electric doors, Rolling shutter doors, telescopic doors, barrier gates, sliding doors, garage doors, swing door remote controls, we also produce rolling shutter door external motor controllers, rolling shutter door tubular motor controllers,

light remote controls, wireless receiving and transmitting modules,
: Copy remote control, copy remote control, dial code remote control, learning code remote control, welding code remote control, rolling code remote control, jack remote control, foreign trade remote control, motor forward and reverse remote control, Water pump remote control, anti-theft alarm remote control,
. ,r- :
:Anti-theft remote control, colorful light strip remote control, balance car remote control,
etc.
!
. External motor rolling door controller manual
. 1.
.
. Product technical parameters
.
Working voltage:
Ambient temperature: -℃-℃
Output current:
Remote control distance: meters
Decoding method: MCU decoding (fixed code remote control and learning code remote control optional)
Working frequency:< br/> Product standard configuration: one control box, two remote controls, and one instruction manual

. 2.
Product Features
The controller and paired remote control use millions of The group learning code encoding chip has an extremely low code repetition rate and is safer to use.

. 3.
Code pairing/reverse setting
This product has learned to code the remote control and controller before leaving the factory. There is no need to pair again before use. If you need to increase or decrease The remote control can be performed according to the following operations
Code matching
First, press the stop motor on the remote control to stop the motor working
Use a screwdriver to press the code matching button and let go. At this time, the signal light (green light) It should light up, and then press any key on the remote control. The controller signal light (green light) will flash three times and go out, indicating that the code pairing is successful.
Code Clearing
Use a screwdriver to long press the code matching button. The signal light (green light) will light up and automatically go out after a few seconds, indicating that the code clearing is successful. Please release the code key when the signal goes out. (All remote controls previously paired with the controller have been cleared)
Motor forward/reverse setting
When you need to change the direction of the motor, just turn the reverse switch to the other end. Returning to the original settings operates the same. Before changing the forward and reverse direction of the motor, be sure to stop the motor. Plug-in controller
Square controller