Hunan eva cold and hot pressing molding machine

Type hot press molding machine, (/hot press molding machine, in-mold decorative inlaid injection molding, hot press molding machine, pneumatic/hydraulic hot press molding machine, equipment) panels, face cases, signs, mobile phone sheaths
Hot Press The main parameters of the molding machine are as follows:
, - liquid pressure is the power source, an external three-phase three-phase power supply is connected, and the maximum output of the oil cylinder is 3 (tons of force).
, motor power, heating power. Adopt Delta intelligent thermostat, far-infrared carbon fiber heating tube.
Effective baking area 3*, (suitable for small products such as mobile phones), baking temperature - adjustable in degrees Celsius. Cylinder lowering speed/second.
, The weight of the whole machine is 3
2. Product features:
, Using liquid pressure as the power source, it does not use compressed air like traditional equipment. Since the compressibility of hydraulic pressure is almost zero, it The speed and pressure stability are much higher than ordinary molding machines.
It adopts an integrally welded open structure, so the welds have been stress-relieved and processed integrally on the processing equipment. It is very convenient to operate. As long as the mold is replaced, it can be used for both forming and punching.
The output of this machine is optional - (ton of force), which is something that ordinary compressed air molding machines cannot do.
The speed of this machine can reach up to /second, and the impact noise does not exceed decibels, which is equivalent to a normal conversation in the office. It is simply incomparable to ordinary compressed air molding machines.
This machine adopts a carbon fiber heating tube with electrothermal conversion efficiency as high as above, rapid heating, small thermal lag, and uniform heating (the far-infrared rays emitted are called the lifeline of human beings by the medical community), and its lifespan (continuous burning ) hours or more, long-term operation of this machine by staff can strengthen the body's blood circulation, accelerate metabolism, and enhance immunity.
This machine controls the voltage of the heating element (reduces its power supply voltage when it is close to the set temperature to ensure that the heating tube is in a long-term lighting state and prolongs its service life). The displayed temperature and the actual temperature are controlled to be positive or negative. Within degrees Celsius.
The heating element of this machine is completely sealed with insulating cotton. When in standby, the external radiation power only accounts for 10% of the heating power. However, the external radiation power of conventional hot press molding machines in the market is as high as 10%. In hot summer, conventional equipment needs to be equipped with a air conditioning. And our hydraulic equipment only requires Taiwan.
Shenzhen Taihong Machinery Equipment Co., Ltd.