Year1
- 主机：
- 铸铁，不锈钢
- 安装系统：
- 碳钢防腐，不锈钢
- 叶轮：
- 玻璃钢，聚氨酯，碳钢防腐，不锈钢
. Submersible propeller, submersible flow propeller, low-speed flow propeller, B submersible propeller
.
b
rr: r . 1. Product use
The low-speed push flow machine is suitable for aeration tanks and anaerobic tanks in industrial and urban sewage treatment plants. It generates strong water flow with low tangential flow and can be used for water circulation in the tank as well as nitrification, denitrification and removal. The phosphorus stage creates water flow and more.
2. Scope of application
The low-speed push flow machine should be able to operate normally and continuously under the following conditions:
. The maximum medium temperature does not exceed degrees Celsius
. The value of the medium is between ~
. The density of the liquid does not exceed kilograms/cubic meters
. The diving depth for long-term diving operations generally does not exceed.
3. Performance characteristics
The low-speed push flow machine has compact structure, simple operation and maintenance, convenient installation and maintenance, and long service life.
.The impeller has the best hydraulic design structure and high working efficiency. The swept-back blades have a self-cleaning function to prevent entanglement and blockage of debris.
.Mixed with the aeration system, the energy consumption can be greatly reduced, the oxygenation amount can be significantly increased, and precipitation can be effectively prevented.
.The insulation level of the motor winding is A, the protection level is A, the imported bearings and the unique patented motor anti-condensation device are selected to make the motor work safer and more reliable.
.Two mechanical seals, made of tungsten carbide-tungsten carbide. All exposed fasteners are stainless steel.
4. Precautions for model selection
To ensure the best results, please provide the following information:
.Purpose of use
.Pool type
. Pool size
. Media characteristics include viscosity, density, solid content, etc.
The supporting equipment required for the low-speed push flow machine is determined according to the volume, density, viscosity and mixing depth of the mixing liquid. One or more mixers should be used according to the specific situation.
Please contact the supplier for selection questions.
The low-speed push flow machine must be completely submerged in the water to work. It cannot work in flammable and explosive environments or environments with highly corrosive liquids. The minimum submersion depth is the minimum.
5. Product Features
The low-speed push flow machine is suitable for aeration tanks and anaerobic tanks in industrial and urban sewage treatment plants. It produces strong water flow with low tangential flow and can be used in tanks. The water cycle and the nitrification, denitrification and phosphorus removal stages create water flows, etc.
.
. 6. Installation system
.
. 3
'
. Installation of submersible mixer
. The special installation system can quickly install and dismantle the submersible mixer without draining the pool sewage.
It is recommended to use installation system 1 when the pool depth is 1 meter. The diving depth of the submersible mixer can be adjusted in the vertical direction as needed, and the maximum angle that can be rotated around the guide rod in the horizontal display is positive and negative. The relevant connection surfaces of the base, support frame and lower bracket of the lifting system and the pool all use expansion bolts. Fixed, no need to reserve holes. The second installation system uses guide steel ropes instead of guide rods, which has the characteristics of convenient transportation and simple on-site installation. This system fundamentally avoids the bending and deformation of the guide rod due to transportation, which affects normal use, and effectively improves the inability to lift normally due to the installation error of the guide rod when the pool depth is too deep. It is even more convenient and reliable to operate under the installation condition of a cantilevered pool top.
. Picture 3
Picture 3 3
Picture
New Nanjing Zhongde Environmental Protection Equipment Manufacturing Co., Ltd.
New
New address: Nanjing City No. Shuangqiao Road, Xinguang Community, Jinniuhu Street, Liuhe District
New
New
New Contact Person: Xu Min (
New Manager)
New
New< br/> New
New Fax:
New
New Email:
New@3
New
New
New
New
New
WhatsApp
