Year1
- 主机：
- 铸铁
- 刀具：
- 合金钢
bb Economical solution to the aqueduct crushing needs of small wastewater treatment plants
bb Effective crushing of screen residue prior to treatment
bb Crushing a large amount of sludge can improve the processing efficiency of the digestion workshop
bb Treatment of industrial production sludge
. bb The sludge cutting machine is designed to process sewage and sludge produced in modern society. . It can handle all kinds of waste entering communities, industrial wastewater collection stations and sewage treatment systems.
bb. Strong crushing force and energy saving
bb The dual shafts operate at different speeds to increase the tearing ability of solids.
bb Low operating speed (typical speed) can produce high torque.
The low peripheral speed of the bb blade ensures that energy is not wasted on water loss while minimizing abrasive wear rates.
bb .3 Best crushing capacity
. bb Set the backward-inclined blade shaft on the sludge cutter according to the angle of sewage inflow. This design captures any discharge. If reprocessing is required, objects can be dropped into the built-in foreign object trap beneath the blade holder. The different rotational speeds of the blade set can tear the fibrous material, and the front and side edges of the blade teeth can cut the plastic into pieces. The peripheral flat surface of the blade can also crush brittle objects.
. bb 3 Structure and working process
bb. Sludge cutting machine is mainly composed of driving parts, driving shaft, driven shaft, milling cutter, seal, casing, etc. The driving device of the sludge cutting machine drives the driving shaft to rotate, and at the same time, the driving shaft drives the driven shaft through precision gears, causing the milling cutters fixed on the two axes to rotate in reverse, biting and crushing the solid objects
. bb structure Features
The bb sludge cutter reducer and motor adopt shaft-mounted bevel gear helical gear reducers, making the sludge cutter compact in structure and more convenient to install and maintain.
bb The driving shaft and driven shaft of the sludge cutting machine have different speeds to facilitate self-cleaning of slag inclusions between the milling cutters.
The milling cutters used in the bb sludge cutting machine are in left-hand and right-hand spiral shapes. After being installed into the driving shaft and driven shaft, they are arranged in left-hand and right-hand spiral shapes to reduce the crushing force and improve sludge cutting. Machine transmission stability.
bb The bearing part of the sludge cutter is sealed to ensure the normal operation of the bearing
bb Independent cutting blade and gasket
bb The cutting blade and gasket are made of high-strength alloy steel, and the surface is polished evenly and hardened to a minimum.
bb cutting blade. The horizontal gap between the gasket and the shaft does not exceed . to ensure normal driving of the cutting blade, reduce wear, and increase the pressure of the gasket.
bb In order to ensure the particle size, the height of the blade tip should not exceed 3 mm of the tooth root diameter.
The bb shaft, the driving shaft and the driven shaft of the sludge cutting machine are made of high-strength alloy steel and are tempered to meet the strength requirements.
The sludge cutting machine has the function of chopping or grinding the massive and fibrous solids contained in the sewage.
Performance parameters
3
, Dual drive shaft differential operation: Dual drive shaft structure is adopted, and the dual drive shafts work at different speeds. This produces multiple effects on the impurities in the sewage, such as tearing, pulling, shearing, etc., thereby completely crushing the impurities.
. Low speed: the maximum speed of the dual drive shafts does not exceed r.
High torque: Low speed produces high torque. To achieve high-quality cutting results.
. Low energy consumption: The motor power of the B-type sludge cutting machine with a flow rate of less than 3/3 requires only ., which is much lower than the power value of cutting machines from other manufacturers. Thereby saving energy.
. Blade: Both drive shafts are designed as tandem blade sets. The blades are all designed with independent blades and spacers. Each blade and spacer can be disassembled and assembled independently, reducing spare parts procurement and labor maintenance costs.
. Pump body: integral inlet flange, simple structure and easy maintenance. The built-in foreign body hole can accept any foreign matter that cannot be cut after entering the cutting machine. This hole also has an external access cover that can be opened regularly for cleaning.
New Nanjing Zhongde Environmental Protection Equipment Manufacturing Co., Ltd.
New
New address: Shuangqiao, Xinguang Community, Jinniuhu Street, Liuhe District, Nanjing City Road number
New
New
New contact person: Xu Min (
New manager)
New
New
New
New Fax:
New
New Email:
New@3
New
New
New
New
New
New
New
WhatsApp
