Shaoguan crawler shot blasting machine Shangtai factory direct sales

机械外型尺寸：

1300*1210*3450

抛丸机功率：

7.5KW

总功率：

77.97KW

The crawler shot blasting machine has high-strength and wear-resistant rubber crawlers or manganese steel crawlers to load workpieces. It uses a high-speed rotating impeller to throw projectiles onto the workpiece in the chamber to achieve the purpose of cleaning. It is suitable for sand cleaning, rust removal, and oxidation removal of small
castings
,
forgings
,
stamping parts, gears, springs, etc. Skin and surface strengthening, especially suitable for cleaning and strengthening parts that are not afraid of collision.
Purpose
This machine combines domestic and foreign technologies. It is a cleaning equipment with good cleaning effect, compact structure, low noise, and is used for surface rust removal or shot blasting in large and medium-sized batch production.
Strengthened, has the following characteristics:
, adopts cantilever centrifugal
shot blaster
, has the characteristics of long service life, simple structure, etc.
, adopts /, /, /Three projectile speeds.
The pulley
Adopts the internationally advanced quick-change structure, which is conducive to improving production efficiency and reducing labor intensity.
, Use B-type separator, which has good separation effect and high productivity, and has a positive effect on improving blade life
, Use
bag dust collector
The emission concentration is lower than the national standard, which improves the working environment of workers
This model adds some special mechanisms such as manual pill splitting gate and discharge door.
This type of crawler shot blasting machine can be used as a stand-alone machine or with wiring.
Structure and Principle
This machine is a small cleaning equipment, which mainly consists of a cleaning chamber,
shot blaster
assembly,
elevator
, separator, electrical system and other parts. See Figure 1 (Table 1 indicates the names corresponding to the serial numbers of each part)
Working principle
: Add a specified number of workpieces to the cleaning room. After the machine is started, the projectiles thrown out at high speed by the shot blaster form a The jet beam hits the workpiece surface evenly to achieve the purpose of cleaning and strengthening. The thrown projectiles and sand particles flow into the elevator and are lifted by the elevator to the separator for separation. The dust is sucked by the fan to the
dust collector
Telephone:

Address: Xiangxinglia Street No., Xinmin Community, Changan Town, Dongguan