Nanjing lifting door manufacturer

颜色：

多色可选

尺寸：

根据实际门洞尺寸

透视：

可带小窗和小门

Contact: Manager Wang:
1. Introduction to Nanjing lifting door:
Nanjing industrial lifting door is composed of multiple door panels, balanced by a counterweight, with the help of a spring balancing device and a low-power transmission system to glide along the wall And up. The lifting door takes up space, is highly adaptable, and can be opened and closed flexibly up and down. It is not limited by space and can be installed and deployed according to the upper space and left and right space of time, depending on the specific application for exterior or interior decoration, etc.
The Nanjing lifting door itself has an electrical interlocking device for the small door. When the small door is opened, the circuit breaker switches off the control power and the door cannot operate.
2. Features of Nanjing Lift Door:
. Door panel use: Lift door panel is a high-quality cold-rolled steel plate with a thickness of mm and a height of mm. Its interior and surface are transversely concave and convex with orange peel embossing. . The internal filling of the door panel is polyurethane foam, which can provide thermal insulation, freezing and rain protection. The door panel has excellent insulation and has been professionally tested.
.Sealing performance: The top and bottom seals of the assembly and the seals at the door panel connections are all equipped with rubber strips to ensure good sealing performance between door panels and between door panels and tracks.
3. Torsion spring system: The imported high-strength spring system ensures balance. After Xilang's special calculation and design of the torsion spring balance system, the service life of the spring is 3 cycles.
.Track design: Rolled from millimeter-thick galvanized steel plates, it consists of wheel rails and auxiliary rails.
. Motor and control device: Select the corresponding motor according to the size, weight and opening frequency of the door, usually a Pioneer motor of 3 or 3. The control box is equipped with buttons to realize the on/stop/off operation function. The standard three buttons are used to open, and there is also a remote control to open (optional).
3. Installation cases of Xilang lift door:
.Benz flagship store in Quanzhou, Fujian
.Nanjing Automobile Forging Co., Ltd.
3. Glanbia Nutritional Products (Suzhou) Co., Ltd.
.Chery Automobile Co., Ltd.
.Nanjing Jianyou Biochemical Pharmaceutical Co., Ltd.
.SCHOTT Glass Technology (Suzhou) Co., Ltd.
.CECEP Solar Technology (Zhenjiang) Co., Ltd.
.Suzhou Direct International Logistics Co., Ltd.
.Furukawa Qihong Electronics (Suzhou) Co., Ltd.
.Nanyang Dongsen Pharmaceutical Logistics Co., Ltd.
.United Huali (China) ) Co., Ltd.
4. Advantages of Nanjing lifting door manufacturers:
. Direct supply from manufacturers to ensure product quality and performance. It also has a large number of after-sales service team members, one-year warranty service, and lifetime maintenance and repair services. Guaranteed for your use.
. To ensure the safety of the product, the bottom edge of the Nanjing lifting door is equipped with a safety protection device, which is installed in the bottom seal of the door body. When the bottom of the door encounters an obstacle, the door body is stopped or reversed through pneumatic and infrared devices. Move to the fully open position.
3. Nanjing lifting door has a spring breakage protection device to prevent the torsion spring from breaking and the door body to fall freely.