Anti-spill herringbone skirt, anti-spill baffle, if you bloom, butterflies will come. Recommended gripper

Clamp_Copy anti-overflow skirt Sichuan Linfen Chongqing customized herringbone composite anti-overflow skirt##composite skirt skirt#Xinjiang belt retaining length can be customized type anti-overflow skirt delivery physical picture_Copy Anhui Double-layer baffle Chongqing anti-overflow skirt Guangdong skirt Shanghai holder Hebei belt baffle Jiangxi angle aluminum holder Jiangsu herringbone anti-overflow skirt
[Product ownership]: Guide trough anti-overflow skirt polyurethane Rubber composite type
[After-sales maintenance]: One-year warranty and lifetime maintenance
[Material composition]: High-quality natural rubber + wear-resistant rubber polymer polyurethane
[Storage method]: It should be dried at room temperature to avoid acid Alkali
[Conventional model]: ######*
[Conventional common name]: type anti-spill skirt, composite anti-spill skirt, polyurethane skirt baffle
[Technical Q&A 】：15963064997
In today's society, due to the impact of the environment and resources, many companies must consider environmental protection and dust reduction. Generally, spray can effectively reduce dust, but it is only limited to the head part of the conveyor belt. Dust reduction during belt transportation is also important. The anti-overflow skirt effectively solves this convenient problem.
Installing double-sealed anti-overflow skirts outside the side panels of the guide trough can effectively prevent coal sprinkling, air leakage, powder leakage, etc. on both sides of the guide trough. It plays an important role in reducing the dust concentration in the belt corridor and improving the environment. effect. Feel free to contact me anytime! 15963064997
#########The specifications and sizes of the belt baffles vary. Please specify when customizing. If there is a higher or lower working temperature, please explain in advance. Different materials can be added according to the temperature to ensure long-term and convenient use.
The guide trough sealing skirt developed by our company is designed according to the optimized structure of the guide trough. It has good sealing performance and long service life. The sealing skirt is mainly composed of a sealing plate and a pressing piece.
.Conventional medium seal skirt is made of polyurethane rubber composite material, which has high wear resistance, is durable, does not damage the belt, and has high tensile strength.
The sealing plate is composed of a vertical plate (what everyone calls the main board) and a side plate (usually called an attachment plate). The side plate has good flexibility. The bottom surface of the vertical plate is in contact with the belt. The side plate and the vertical plate are integrated. The double-layer bipolar sealing protection has a good sealing effect. The side seal can be adjusted according to the distance between the edge of the tape and the guide groove until the height is suitable. The high-quality side seal and the tape are well combined so that it does not exceed the edge of the tape and will not be cut
The sealing groove of the side seal adopts a single-sided arc transition tape. When the tape deviates, it will not break the side seal and can automatically restore to its original state.
. There are two types of compression: butterfly nut locking and handle locking. It is easy and fast to install and remove.
Adjust the pressure on both sides of the angle steel by yourself to make the pressure even and the side seal will not fall off. The commonly used handle type clamps are easy to install, simple to use and can be recycled to reduce labor costs.
The base of the holder is welded to the side of the guide trough, and the outer slide is deep into the base, allowing the holder to be manually rotated along the compression handle and pushed up (down) to the bottom when appropriate, which can exert sufficient pressure on the diagonal aluminum to maintain the skirt. The plate position and the pressing handle will not loosen and fall off. The base moves left and right appropriately.
The holder is made of hot-dip galvanized steel, which is lightweight and has good anti-corrosion properties and will not rust. The fastening bolts are made of stainless steel and will never rust. They are suitable for use in dark, humid, or even short-term water flushing environments.
Except for the first installation, the holder base needs to be welded, the rest of the process and the subsequent replacement of the skirt
Sales person in charge Li Ying
Xiao Li hotline/WeChat-
After-sales call --
Manufacturer Fax--
Contact-
Same product than quality. Same quality than price. Same price than service. Good products will speak. When you receive our products, you will Very satisfied!