DYTZ1500-800 electro-hydraulic straight push rod, conventional model standard manufacturer Xiaolizi

tons photo_Copy D electro-hydraulic_Copy D electro-hydraulic push rod_Copy straight electro-hydraulic push rod selection 15963064997 Independent research and development and production There are also electric push rods manufactured in Shanxi electro-hydraulic push rods Rod, Inner Mongolia D electro-hydraulic actuator, Guizhou D, Yunnan straight electro-hydraulic actuator, Gansu long-term use model
Although the guest trip is happy, it is better to return home early.
Who should I sue when I am alone, wandering and thinking?
The leader returned to the room and wet his clothes with tears.
DDDDD stroke thrust can be customized according to requirements. Please read the ordering instructions carefully!
About ordering and specifications:
Model description: The electro-hydraulic push rod is mainly composed of six basic elements: the type of push rod, the protection level of the motor, the rated output force, the stroke, the rated speed and the angle of use. It can be equipped with three adjustment functions according to special requirements: speed adjustment push, pull adjustment and stroke adjustment (stroke switch positioning). In addition to the above three adjustment functions that must be clearly stated when ordering, please refer to the model preparation method and carefully fill in the six major elements. D-type integral straight electro-hydraulic push rod technical parameters (selection table)
Model rated output force () rated speed (/) motor model stroke manufacturing range stroke manufacturing range
Thrust pull force push speed pull speed
-.-
-.-
-.-
-.-
--
--
-.-
-.-
-.----
--
[Product Attribution]: To realize the extension and retraction process of equipment, it is suitable for various equipment
[Material composition]: It mainly includes hydraulic control valve group, oil pump motor, actuator (cylinder) and other related accessories.
[Conventional model]:
[Conventional common name]: Electro-hydraulic gate switch, electro-hydraulic push rod, electro-hydraulic push-pull
[Technical Q&A]: 159630 64997
[Storage method]: It should be stored dry at room temperature to avoid acid and alkali power outage.
[After-sales maintenance]: One-year warranty and lifetime maintenance
Comparison with similar products:
Electro-hydraulic push rods have the following advantages compared with electric push rods, electric actuators, hydraulic cylinders and air cylinders :
It has reliable automatic overload protection performance. Even if it is overloaded or runs to the end of the stroke, the motor can still operate normally without burning or damaging other parts. Electric push rods and electric actuators are not comparable.
Electro-hydraulic push rods can be started with load, but it is difficult for electric push rods and electric actuators.
The push and pull force of the same electro-hydraulic push rod can be adjusted steplessly within its rated push and pull force range, so it has a wide range of driving force, which cannot be achieved by electric push rods and cylinders.
. When the thrust and speed are the same, the electric energy consumed by the electro-hydraulic push rod is half of that of the electric push rod and electric actuator.
The electro-hydraulic push rod adopts full hydraulic transmission, which is sensitive and stable in operation, and can effectively slow down external impact forces. Accurate stroke control cannot be achieved by cylinders, electric push rods and electric actuators.
. The electro-hydraulic push rod adopts a fully enclosed structure integrating mechanical, electrical and hydraulic. The working oil circuit circulates in a pressureless closed steel cylinder. It is small in size, does not leak oil, and is easy to install and maintain. In harsh environments, it does not absorb dust, does not enter water, and does not rust internally. Its service life is longer than that of cylinders, electric push rods, and electric actuators.
, small investment. The cylinder needs to build an expensive air compressor station. The air pressure pipe leaks easily, the air pressure is unstable and the noise is high. The hydraulic cylinder needs to build a hydraulic station, while the electro-hydraulic push rod only needs to be connected to the power supply to be used.
Easy to maintain. Under special circumstances, the electro-hydraulic push rod only needs to be replaced, while the hydraulic cylinder needs to slowly identify the cause of the failure and then conduct careful repairs, which affects the normal operation of the entire work.
A world in a sand, a paradise in a wild flower, a heart of trust, a full win-win situation
Supplying high-quality products to those who trust us. With trust, even if we are thousands of miles apart, it is like a short distance. .
Sales manager Li Ying
Xiao Li hotline/WeChat-
After-sales call--
Factory fax--
Online-