Shandong dough mixing machine manufacturer

发货方式：

物流

包装：

木箱

价格：

电议

Sales, Sales Manager: Ms. Liang Sales QQ Address: Xingwan Industrial Park, Hebei Province
Shandong dough mixer manufacturer mainly consists of a frame, dough bucket, automatic tipping mechanism, electrical control part, etc. The transmission part uses a turbine reducer And chain drive, automatic tipping bucket, built-in motor, compact structure. The electrical control part controls the forward, reverse rotation and stop of the main and auxiliary motors through control buttons and AC contactors. The travel switch plays a limit protection role when the bucket is tipped.
Shandong dough mixer manufacturers' equipment is widely used in large and medium-sized catering units and is an ideal supporting equipment for production lines.
Product Introduction
The dough mixer has compact structure, easy operation, low power consumption and low noise.
, special structural design, low friction temperature during mixing, making the dough heat up slowly, effectively ensuring the toughness of the dough.
Product Operation
Connect the ground wire, install the leakage switch, and check whether the voltage is consistent with the voltage used by the machine.
Before use, the machine should be fully inspected to see if there are any obstacles in each rotating part, whether the lubricating part is smooth, and whether the inside of the noodle bucket is clean.
For single-phase mixers, please note that the power supply voltage deviation should not exceed % of the rated voltage. If the power supply voltage is higher or lower than the rated power of the motor, use a voltage regulator or voltage stabilizer that is greater than % of the rated power of the motor. .
Test the machine and turn on the unit. Note that when the machine's rotation direction is opposite to the arrow, you can swap two of the power supplies (three phases) to make the steering normal.
After the test, wait for the machine to operate normally. Add flour into the dough hopper and stir (the amount of water can be determined according to the amount of dough). After mixing evenly, disconnect the power supply, pull the positioning lock, and lower the box. Tilt to remove the dough. (It is strictly prohibited to put your hands into the dough bucket when the machine is working).
Shandong dough mixer manufacturer reminds that after the work is completed, the machine should be cleaned, the lid should be closed to ensure hygiene, and lubricating oil should be added to each rotating part for easy use next time.