YT2-90/6 electric hydraulic thruster, Guolong manufacturer is fully responsible for Xiao Lizi

There is a beautiful woman in the north. Peerless and independent.
Electric hydraulic pusher Hydraulic pusher Electric hydraulic pusher Rest assured and worry-free
You choose us and we will give you high-quality electric hydraulic pusher
Our company's products are mainly sold to: Shanxi, Inner Mongolia, Guizhou, Yunnan, Gansu, Ningxia, Liaoning, Sichuan, Xinjiang, Hebei, Fujian, Hubei, Shanghai, Jiangsu, Shaanxi, Jiangxi, Shandong, Henan, Jilin, Heilongjiang, Zhejiang, Anhui, Beijing, Tianjin, Chongqing and other places
The electric hydraulic pusher is composed of two parts: the driving motor and the body (centrifugal pump). The body part is composed of a cover, a cylinder, a piston, an impeller and a rotor. When energized, the motor drives the impeller on the rotary shaft and the rotary shaft to rotate, causing the piston to rotate. Under the influence of this pressure, oil is sucked from the upper part of the piston to the lower part of the piston, forcing the piston and the push rod and crossbeam fixed on it to rise rapidly. The lever mechanically compresses the load spring (the pusher or brake has a load spring) to produce mechanical movement. (If matched with a series of hydraulic pushers, the brake will be released). When the power is cut off, the impeller stops rotating and the piston will quickly drop under the action of the load spring force and its own gravity, which will force the oil to flow back into the upper part of the piston, which is still restored to its original position through the lever mechanism. (If it matches the series brake, it will hold the brake)
Main technical parameters:
Model
=> Rated thrust (Newton)
=> Rated stroke (mm)
= > Drive motor power (watts)
=> Maximum number of operations per hour (times/hour)
Unloaded spring




Conditions of use:
. Ambient temperature - ℃ ~ + ℃, use D-hydraulic oil
. Relative humidity: should not be greater than %
. There must be no flammable, explosive and Corrosive gases
. The altitude of the place of use complies with
. Anti-corrosion products should be used if there are outdoor rain and snow erosion or corrosive gases and media.
.Voltage and frequency: three-phase AC/
[Material composition]: Drive motor and body (centrifugal pump) body part consists of cover, cylinder, piston, impeller
[Application fields] : Realize the extension and retraction process of the equipment. It is suitable for various equipment drive control devices and can perform reciprocating motion, swing motion and circular motion
[Regular model]:
[Technical Q&A]: 159630 64997
[After-sales maintenance]: One-year warranty and lifetime maintenance
[Storage method]: It should be stored in a dry place at room temperature to avoid acid and alkali power outages.
Electric hydraulic block brake★Clamp disc brake★Electric hydraulic pusher D/★Electric hydraulic brake★Electric hydraulic brake
Sales manager Li Ying
Xiao Li hotline/WeChat-
After-sales call--
Factory fax--
Online-