Zhaoyuan highway caulking cement PVC cement caulking and leak-proofing PVC waterproof ointment has excellent construction properties

厂家：

衡水德祥

规格：

25KG/袋

型号：

加温型

Zhaoyuan highway caulking cement PVC cement caulking and leak-proofing waterproof ointment has excellent workability. Zhaoyuan highway caulking cement PVC cement caulking and leak-proofing waterproofing ointment has excellent workability. Zhaoyuan highway caulking cement PVC cement caulking Leak-proofing and waterproofing ointment has excellent workability. Zhaoyuan highway caulking mud and polyvinyl chloride glue caulking and leak-proofing and waterproofing paste have excellent workability. Vinyl chloride mastic is a thermal construction waterproof joint material made from coal tar as the base material, adding polyvinyl chloride resin, value-added agent, stabilizer, antioxidant and filler in a certain proportion, and plasticizing at -℃ temperature. It can be used for caulking and waterproofing of various new and old concrete roof panels, wall panels, floor slabs, floors, aqueducts, water pipes, gutters, bridges, dams, driveways, basements and other concrete components and structures under -℃-℃ conditions. It can be used to paint roofs, floors, floors, foundations, caverns, pool irrigation and pipelines to achieve waterproofing, anti-seepage and anti-corrosion effects. Polyvinyl chloride cement PVC cement
Technical performance: Polyvinyl chloride cement
PVC cement products are widely used in cement concrete expansion joint filling and general industrial and civil building layer caulking waterproofing panels. Coating waterproofing, as well as leak-proof, anti-seepage and moisture-proof of walls, building exteriors, underground cold storages, caverns, tanks, pipes and other concrete brick structures, steel surfaces and wooden board projects. Polyvinyl chloride cement
Construction method Polyvinyl chloride cement
When PVC cement is used against old cement concrete, aged joint filling materials and debris in the joints must be removed and the joints must be kept dry. The moisture content should be less than %.
. The new cement concrete should be cleaned after sawing the joints.
Cut the finished polyvinyl chloride clay into small pieces and put them into the pot. Slowly heat up and stir continuously. When melting, the temperature should be controlled at ℃. The maximum temperature should not exceed ℃ to keep the joints filled without bubbling and yellow smoke and thick smoke. If the above phenomenon is found, anneal immediately, accelerate the stirring, and the melted caulking material can be used at any time and new material can be added for continuous operation. Prolonged heating should be avoided to prevent changes in the performance of the caulking material. The melted caulking material should be immediately poured into the joints with a pot and the caulking material should be flush with the road surface. The excess material tip should be removed with a shovel to maintain driving comfort. Polyvinyl chloride cement
The caulking material that adheres to the pot after each shutdown should be removed to avoid affecting the quality of the new caulking material.