Year1
- 颜色：
- 黑色
- 流量：
- 4L/h
- 承压：
- 250Kpa
Drip irrigation is to distribute water and nutrients needed by crops drop by drop evenly and slowly through a low-pressure pipeline system and an emitter installed on the capillary tube according to the water requirements of the crops. A method of dripping water into the soil in the root zone of crops. Drip irrigation does not damage the soil structure, and the water, fertilizer, air, and heat inside the soil are always in good conditions suitable for crop growth. Evaporation losses are small, no surface runoff is generated, and there is almost no deep leakage. It is a water-saving irrigation method.
Advantages of drip irrigation pipes for efficient water-saving, labor-saving and economical micro-irrigation installation:
One-time injection molding of built-in cylindrical drip irrigation pipe emitters, wide and long flow channels, built-in filter windows and strong anti-clogging performance.
, The internal cylindrical drip irrigation pipe has fully turbulent water flow and good water uniformity. The dripper is directly welded to the inner wall of the drip irrigation pipe, with low pressure and head loss and high irrigation accuracy.
Different specifications of drip irrigation pipes are suitable for different irrigation situations and can meet the needs of different customers.
The built-in cylindrical drip irrigation pipe is low in price, reliable in quality and has good irrigation effect. It is easy to install, transport and use. It is an economical water-saving irrigation product and is very suitable for the development needs of precision agriculture.
Pay attention to the following matters during application:
Install a drip irrigation system to ensure that the control area of each section of the main pipe does not exceed half an acre. At the same time, the ground in contact with each hose is flat to ensure smooth water flow.
, put the drip irrigation pipe in and cover it with mulch film before use. If it is not covered with mulch film, you can lay the drip irrigation tape holes downward.
Use a clean water source. There should be no suspended solids larger than .mm in the water. Otherwise, a mesh filter must be added to purify the water quality. When using tap water and well water, filtration is generally not required.
Be careful not to scratch or puncture the drip irrigation tape or main pipe during installation and field operation.
After fertilizing, you should continue to pour clean water for a normal period of time to prevent chemical substances from accumulating in the air and clogging the orifices.
In order to prevent sediment and other impurities from accumulating in the pipe and causing blockage, release the drip irrigation belt and the tail end of the main pipe one by one to increase the flow rate for flushing.
WhatsApp
