Year1
- 颜色：
- 黑色
- 流量：
- 4L/h
- 承压：
- 250Kpa
As the name suggests, drip irrigation pipes are cylindrical when not filled with water, so we also call them inlaid cylindrical drip irrigation pipes. When reproducing the pipe, the dripper is assembled on the pipe. It is a modern water-saving irrigation product that is easy to install and use on the inner wall. The built-in drip irrigation pipe has a large-area inlet flow channel with good anti-clogging effect, and the dripper has a warm flow effect and a certain compensation effect to produce even water.
Drip irrigation pipe installation:?
The water source comes from the diameter of the secondary main pipe of the domestic and production water systems. The water source of the water supply system is a deep well that lifts water through secondary water from a reservoir to the tea garden. The water pressure is about 100%. ?
Equipment: Drip irrigation main pipe: 1-inch diameter pipe Cross-head pipe: 1-inch diameter pipe Drip irrigation tape Drip irrigation pipe Black rubber hose foldable diameter There is a small hole every other hole Water flows into the tea garden through this hole Plug: Block the elbow and straight connection at the end of the drip irrigation pipe of the drip irrigation belt: Use a tee to turn or lengthen the drip irrigation pipe of the drip irrigation belt: Used to connect the drip irrigation belt and the horizontal pipe. ?
Installation:
Set the main pipeline: Set according to the slope of the tea garden and the length of the tea row. The direction of the main pipeline should be consistent with the slope of the tea garden. The width of the pipe installation is ~
The installation of the horizontal head pipe: It is installed in order to reduce the water pressure difference between different slopes. That is, install a tee from the main pipe to the cross-head pipe, install a valve, and then install a tee to connect the cross-head pipe. The length of each set of cross-head pipes is ? and connected to the root drip irrigation belt. The valves installed on each tee on the main pipe can control the water supply of the row of drip irrigation belts. The water supply of this row of drip irrigation belts is independent, which is called a group drip irrigation facility. It can balance the water pressure on different slopes by adjusting the size of the valve and the number of valve openings< br/> Setting of the drip irrigation belt: Determine the length of the drip irrigation belt according to the length of the tea row. The drip irrigation belt passes through the base of the tea tree in the middle of the double planting row
When installing the drip irrigation system, a mesh filter, centrifugal filter or laminated filter or mesh centrifugal filter must be installed at the beginning. If fertilization is required, a venturi can be installed. After three to five years of fertilizing the fertilizer tank, the tea trees have a large water demand and can be irrigated with a suspended micro-sprinkler ground-inserted micro-sprinkler flow stabilizer pressure-compensated emitter drip irrigation system.
WhatsApp
