Year1
- 颜色：
- 黑色
- 流量：
- 70L/h
- 承压：
- 0.3Mpa
Small-tube outflow irrigation system (also known as spring irrigation) has received more and more attention and approval from users in recent years. Especially in orchards and ecological forests. In the construction of fast-growing forests, it has advantages that other types of irrigation equipment cannot match due to its unique advantages such as large flow rate, resistance to clogging, and easy installation and maintenance.
The application of the flow stabilizer greatly improves the irrigation uniformity of the small tube outflow irrigation system, allowing the system to maintain the original characteristics while having an irrigation uniformity comparable to that of the compensated drip irrigation pipe. Moreover, because of its good compensation characteristics, this system has unique advantages whether it is laying capillary pipes over long distances or overcoming the influence of various complex terrains, providing broad development prospects.
Small tube outflow is a new water-saving irrigation method suitable for irrigating orchard trees. Small tube outflow refers to using a hole punch to install a turbulator on a (polyethylene) branch pipe, and then installing a turbulator on the other end of the turbulator. It is a water-saving irrigation method where the turbulent flow interceptor capillaries reach directly to the roots of crops.
Small tube outflow refers to the irrigation method in which a turbulator is installed on the branch pipe and then a section of capillary tube is installed at the other end of the turbulator directly to the roots of the crops.
1. Components of small pipe outflow water-saving irrigation system
Power machinery: extract water from the water source and enter the main pipe network.
, Head system: including control system, fertilization system, and filtration system.
. Main pipe network: Water main pipes are generally composed of pipes and pipe fittings.
. Irrigator: It is composed of turbulence device and capillary tube.
2. Characteristics of the small tube outflow water-saving irrigation system
Energy saving, less clogging problems, and simple water quality purification treatment. The diameter of the flow channel of the small tube irrigator is much larger than the diameter of the flow channel or orifice of the drip irrigation irrigator. The large flow outflow solves the problem of drip irrigation system emitters being easily clogged. Therefore, it is generally sufficient to install a mesh filter at the head of the system (the filter media of the drip irrigation system filter requires a mesh). If you use well water with good water quality for irrigation or pool irrigation with good water quality, you don't need to install a filter. At the same time, due to the large mesh size of the filter and the small water head loss, it can reduce energy consumption and extend the flushing cycle
Fertilization is convenient. When fertilizing fruit trees, the fertilizer liquid can be injected into the pipe and followed by the irrigation water into the soil of the crop root zone, and the fertilizer can be evenly distributed. Spread in the seepage ditch and dissolve into the soil with water. Especially when applying organic fertilizers, various organic fertilizers can be mixed into the soil under the seepage ditch and matured under suitable water, heat and air conditions to fully exert the fertilizer effect, which solves the problem of drip irrigation not being able to apply organic fertilizers.
WhatsApp
