Feed Extruder Fish Feed Extruder Small Extruded Feed Machine

Features of the feed extruder★ Internationally advanced pelletizing structure, which can cut the discharged material into products of the required length.
★ Novel and unique design, simple structure, easy to assemble and disassemble, and easy to operate.
★ The screw and screw are made of chromium-molybdenum aluminum, a special wear-resistant, high-temperature and high-humidity material. They are first quenched and tempered and then heat-treated to form. They have the advantages of wear resistance and long life.
★ The main shaft bearing combination uses imported bearings to ensure the safety and reliability of the extruder.
★ The floating pellet extruded feed produced can float on the water surface and remain on the water for at least 1 hour without dispersing. Fish and livestock like to eat it and it is easy to digest. The food intake of frogs and fish can be easily observed manually without causing any loss of feed. Waste and will not pollute water quality. The material can effectively kill harmful bacteria such as Escherichia coli and Salmonella through high temperature and high pressure, ensuring the hygiene of the feed. It is conducive to protein denaturation and absorption and starch gelatinization, and is easy to be absorbed by fish and livestock. Generally, puffed floating fish feed is used to save feed than powdered or granular feed.
★Producing cooked sinking aquatic poultry and livestock pellet feed can eliminate most of the toxins and anti-nutritional factors anti-trypsin and urease contained in the material, which is beneficial to the digestion and absorption of animals and improves the digestion of nutrients. Utilization.
Scope of application Suitable for frog aquatic ornamental fish pet feed farmers, small and medium-sized feed factories and scientific research units Features of Feed Extruder
★ Internationally advanced pelletizing structure, the output can be cut into products of the required length.
★ Novel and unique design, simple structure, easy to assemble and disassemble, and easy to operate.
★ The screw and screw are made of chromium-molybdenum aluminum, a special wear-resistant, high-temperature and high-humidity material. They are first quenched and tempered and then heat-treated to form. They have the advantages of wear resistance and long life.
★ The main shaft bearing combination uses imported bearings to ensure the safety and reliability of the extruder.
★ The floating granular extruded feed produced can float on the water surface and remain on the water for at least 1 hour without dispersing. Fish and livestock like to eat it and it is easy to digest. The food intake of frogs and fish can be easily observed manually without causing any loss of feed. Waste and will not pollute water quality. The material can effectively kill harmful bacteria such as Escherichia coli and Salmonella through high temperature and high pressure, ensuring the hygiene of the feed. It is conducive to protein denaturation and absorption and starch gelatinization, and is easy to be absorbed by fish and livestock. Generally, puffed floating fish feed is used to save feed than powdered or granular feed.
★Producing cooked sinking aquatic poultry and livestock pellet feed can eliminate most of the toxins and anti-nutritional factors antitrypsin and urease contained in the material, which is beneficial to the digestion and absorption of animals and improves the digestion of nutrients. Utilization.
Scope of application: Suitable for frog aquatic ornamental fish pet feed farmers, small and medium-sized feed factories and scientific research units
Features of feed extruder
★ Internationally advanced pelletizing structure, can cut the discharged material into any desired shape Length product required.
★ Novel and unique design, simple structure, easy to assemble and disassemble, and easy to operate.
★ The screw and screw are made of chromium-molybdenum aluminum, a special wear-resistant, high-temperature and high-humidity material. They are first quenched and tempered and then heat-treated to form. They have the advantages of wear resistance and long life.
★ The main shaft bearing combination uses imported bearings to ensure the safety and reliability of the extruder.
★ The floating pellet extruded feed produced can float on the water surface and remain on the water for at least 1 hour without falling apart. Fish and livestock like to eat it and it is easy to digest. The food intake of frogs and fish can be easily observed manually without causing any loss of feed. Waste and will not pollute water quality. The material can effectively kill harmful bacteria such as Escherichia coli and Salmonella through high temperature and high pressure, ensuring the hygiene of the feed. It is conducive to protein denaturation and absorption and starch gelatinization, and is easy to be absorbed by fish and livestock. Generally, puffed floating fish feed is used to save feed than powdered or granular feed.
★Producing cooked sinking aquatic poultry and livestock pellet feed can eliminate most of the toxins and anti-nutritional factors antitrypsin and urease contained in the material, which is beneficial to the digestion and absorption of animals and improves the digestion of nutrients. Utilization.
Scope of application Suitable for frog aquatic ornamental fish pet feed farmers, small and medium-sized feed factories and scientific research units
> Model
Power (kilowatt)
Production/













< br/>



Instructions for use of pellet extruded feed machine
The pellet extruder is suitable for raising fish, shrimps, frogs, pigs, ducks, etc. The puffed feed produced by the extruder is soft and cooked, has high protein, complete nutrients, floats on the water for a long time, and does not waste feed. Add trace elements to promote the rapid growth of fish.
Add wheat bran, corn flour, bean curd, fish meal, etc., plus compound premix, add 1 pound of water per pound according to the formula, put it into a mixer and stir evenly for about 10 minutes, start the mixer and mix it The material is pumped into the storage bucket, and the storage bucket is pumped into the Penghua machine port by the auger. Pay attention to controlling the closing of the storage barrel. From small to large.
For the three-grain part, the cutting size is determined by the grain outlet hole. If you want to divide the grain into pieces, open a hole. If you want to have a high output, you can open a hole without peeling. The small motor can be adjusted forward and backward. The knife is in In the same direction, it is best to start with a pound of commercial feed and a lot of water when cutting.
After four times of feeding, disassemble the cutting part of the front section, use a tool hook to immediately disassemble the nut on the extruder head, then start the motor to flow out the excess feed in the machine, and clean the nut orifice plate. Instructions for use of pellet extruded feed machine
The pellet extruder is suitable for raising fish, shrimp, frogs, pigs, ducks, etc. The puffed feed produced by the extruder is soft and cooked, has high protein, complete nutrients, floats on the water for a long time, and does not waste feed. Add trace elements to promote the rapid growth of fish.
Add wheat bran, corn flour, bean curd, fish meal, etc., plus compound premix, add 1 pound of water per pound according to the formula, put it into a mixer and stir evenly for about 10 minutes, start the mixer and mix it The material is pumped into the storage bucket, and the storage bucket is pumped into the Penghua machine port by the auger. Pay attention to controlling the closing of the storage barrel. From small to large.
For the three-grain part, the cutting size is determined by the grain outlet hole. If you want to divide the grain into pieces, open a hole. If you want to have a high output, you can open a hole without peeling. The small motor can be adjusted forward and backward. The knife is in In the same direction, it is best to start with a pound of commercial feed and a lot of water when cutting.
After four times of feeding, disassemble the cutting part of the front section, use a tool hook to immediately disassemble the nut on the extruder head, then start the motor to flow out the excess feed in the machine, and clean the nut orifice plate.