Vertical feed mixer and grinder self-priming feed mixer and grinder

The vertical feed crushing and mixing mixer is an all-in-one mixing machine that can both crush and stir. The motor of the kilogram mixer is equipped with watts. The motor for crushing is equipped with watts
The kilogram mixer is equipped with a kilowatt motor, and the pulverizer is equipped with a kilowatt motor.
The output is kilograms per time, tons per time
Voltage
This is a small compound feed processing equipment specially designed for small and medium-sized compound feed factories in small farms in rural areas
It integrates vertical Improve the level of the mixing bin
The material conveying is integrated into one, it has a simple and compact structure, a one-time small investment, economical and practical
It has the advantages of easy maintenance and no special production site is required, and the mixture can be evenly mixed
The structure of the feed machine and Working Principle
The casing of the pulverizer is welded with materials. The feed port is at the top of the pulverizer. It can be matched with various forms of feeding structures. The hammer blades are symmetrically arranged. When the pulverizer is working, the material enters the crushing chamber and is gradually crushed under the action of the high-speed rotating hammer and the friction of the sieve plate, and under the action of centrifugal force and air flow. Discharge through the bottom outlet.
Use and safety precautions for feed machine equipment
In order to avoid accidents during transportation, loading and unloading of the machine, you must check whether the bolts and nuts of each part are loose, whether there are flat teeth, round teeth, and spindle nuts before use. loose phenomenon. Turn the pulley by hand to check whether there is any collision on the machine.
The operation can only start if the machine rotates flexibly, if there are any debris inside the machine, and if there are no abnormal phenomena after it has been idle for a few minutes.
When working, be sure to remove debris from the materials. It is strictly forbidden to allow iron, stones and other objects to enter the machine to avoid damage to the machine and injury to people.
The material receiving cloth bag should have a length and diameter of more than one meter. meters, the fabric should not be too dense, and the material should be discharged in time during use to ensure that the bag has sufficient breathability.
Feeding should be even and pay attention to the power load to avoid choking. When crushing particulate matter, the pumping plate regulator can be used to adjust the feeding amount.
Hammer type When one corner is worn and affects the work efficiency, the hammer can be turned around from the opposite side (when turning around, the group is adjusted together to avoid causing imbalance in the rotor). All hammers should be replaced.
Gutter should be added before starting the machine every day, and the bearing condition should be checked after hours of use. When installing the sieve, the burr side should be installed on it. According to the fineness of the crushed materials, select sieves with different diameters.
Remarks
The thickness of the cylinder wall of the feed machine equipment is
The motor of the feed machine equipment is a national standard copper core motor and the crushing motor is (optional mixing motor
Mechanical dimensions**
The quality guarantee period of feed machine equipment is one year