Ningbo 901 quick leak plugging spirit factory direct sales

>Leak-plugging spirit
This product is a reactive powdery rapid leak-plugging material composed of inorganic and organic polymer materials. It can be operated with water and has the characteristics of rapid setting and fast hardening, instant water stop, and early High strength, impermeability, crack resistance and other functions.
Scope of application
Suitable for waterproofing, pressure grouting, sealing and sealing of various building roofs, basements, pools, pipelines, civil air defense caverns, national defense fortifications, subway, tunnels and mines. Emergency repair and reinforcement.
Technical performance
<= dd = water added to the clean slurry (%)
Setting time ()
Clean slurry compressive strength
Clean slurry linear expansion rate (%) < br/> Initial setting
Final setting
Minutes
Minutes
Hours
Days
Days
Hours
Days
Day
-
-
-
.
.
.
.
.
.
.
.

Bonding strength: greater than / hour or greater than / day.
Impermeability: The pure slurry specimen is impermeable to water under water pressure.
How to use
First, cut the leaking point or leaking seam into a vertical bell mouth and clean up the debris.
Put one kilogram of rapid leak-stopping agent into the pot and add .~kg of water and quickly stir it into a slurry. When the temperature is lower than ℃, you can use ℃ water to stir.
Put the mixed clay on your hand and when you feel the clay is hot and slightly hard, quickly press it in the direction of the leakage and hold it for a certain period of time before letting go to block the water.
After blocking the water, in order to ensure a smooth surface, use expanded cement mortar to plaster the surface and maintain it for a few days.
For seepage pits, you can directly put the dry powder of quick leak plugging agent into the pit and then step on it with your feet until it hardens before releasing your feet.
. For serious water leakage joints, use the drainage method to first plug the upper joint, then the lower joint, and finally the drainage hole.
For large-area leakage, find the leaking point and block it with quick leak-stopping agent first, then plaster the surface with cement mortar mixed with expansion agent.
Notes
Adding too much water will affect the setting time. This product can be used immediately after adding water without adding any additives.
Packaging, Storage and Transportation
Packaging Specifications/
Bag
This product is a gray powder. Please store it in a dry place and use it once after opening the bag. The shelf life is 1 month. Non-toxic, odorless, non-flammable, non-explosive and transported as general cargo.