Year1
- 产品规格：
- 25KG/桶
- 产品包装：
- 桶装
- 产地：
- 广东
Rubber Anti-Spit Frost Treatment Agent
>Product Description:
>Recently, with the advent of cold and humid weather, the phenomenon of rubber spray-frost has become more serious. Rubber products that are ready for shipment have encountered a lot of quality pressure.
> The rubber spits out frost, wax, and oil: vulcanizing agents, accelerators, active agents, antioxidants, fillers and other powdery ingredients, paraffin, ozokerite and other waxy substances, softeners, thickeners, lubricants, etc. The agent precipitates on the rubber surface. The solubility of the compounding agent in the rubber generally increases with the rise and fall of the temperature. The pressure under which the rubber is stored when it is stored. The temperature and time of the surrounding air also have an impact on the solubility of the compounding agent. Although it generally has little effect, if the pressure is higher If the temperature of the air is too high, the compounding agent in the rubber with high polarity will have a weakened effect on the raw rubber (non-transparent rubber). , the solubility of the compounding agent decreases, resulting in blooming. The longer the storage time, the more obvious the frosting on the rubber surface. Since the temperature and humidity of the air in the storage environment change with the seasons, and the difference is large, it is easy to cause the solubility of the compounding agent. Changes occur, resulting in bloom.
> Yongcheng Chemical has developed corresponding treatment agent products: Rubber frost and wax release treatment agent series, which can fully clean and maintain the original physical properties of the surface of rubber products, and can also increase the secondary processing of the product. The adhesion of the rubber sole. For rubber products with frost vomiting. After being treated with rubber frost treatment agent, it can effectively remove the frost and white wax on the surface of rubber products, making the products as bright as new. The most amazing thing is that it can also form a protective film on the rubber surface to block the micropores on the surface of rubber products. This can reduce the chance of the product coming into contact with the external environment, thus effectively preventing the product from frosting and turning white again. Ensure that customers can ship smoothly and confidently! Therefore, many customers can safely use this treatment agent for products made with problematic raw materials but have not yet experienced frosting. Only in this way can they safely ensure that the products will not suffer from frosting!
>
>Rubber cream and wax spitting treatment agent
How to use the series:
>Use an acid and alkali-resistant toothbrush directly, moisten the treatment agent, and then scrub. When the frost and wax spitting are serious, you can repeat the operation after drying. It can be dried in the oven in just a few minutes!
>
>Features of rubber frost treatment agent:
>Appearance: yellowish or transparent liquid
>Type: organic solvent type, be careful of flammability and explosion
>Packaging barrel
>Operation points: The working environment must be ventilated, protective tools must be worn, and direct contact with the skin is not allowed.
WhatsApp
