Car temperature and humidity alarm

Vehicle temperature and humidity alarm


One product usage and configuration:

Each channel of the vehicle temperature and humidity alarm can set various alarms mode, it can monitor up to 3 digital temperature sensors, temperature, humidity, voltage, current, pressure or changes in measured values of other types of transmitters at the same time. It can also be equipped with optional MMS camera, incoming call, air conditioner, automatic start module, power outage/incoming call, smoke, water, access control and other detector extensions. Its scope of application: when any alarm is detected, an alarm text message will be sent to the mobile phone, Apple and Android mobile phone alarm monitoring center to describe the cause of the alarm, and the preset alarm-receiving mobile phone number will be dialed in turn. The receiving personnel can determine the alarm through the monitoring data and text message content. The alarm monitoring center can display the alarm location on the map, and can immediately send back on-site monitoring values. It can set a certain period of time to send back on-site monitoring values. It can set a fixed point every day to send back on-site monitoring values through mobile phones or computers. Remote access to the Internet allows real-time viewing, recording and storage of the change data of various measurement values, and the data can be made into charts for statistics and printing, so that engineering and technical personnel can analyze and research the monitored data. The alarm monitoring center can be remotely accessed through the mobile phone, Apple and Android. The remote control circuit relay can be switched on and off immediately or with a delay. You can set the linkage relay to switch on and off during alarm. When the alarm monitoring center software receives the alarm information, it will display the alarm time, content, alarm phone number, contact person, contact phone address and other relevant information on the computer screen. , and automatically store this information on the computer hard drive for future query or printing, to improve the management of alarm reception. It is suitable for refrigerators, freezers, cold storage, seafood warehouses, medicine warehouses, greenhouses, vegetable greenhouses that require long-distance monitoring of on-site images, monitoring of on-site sounds, and real-time recording of measurement data. and other places. Our company's products have helped many hospitals and pharmaceutical companies successfully pass the new version of certification.

Vehicle temperature and humidity alarm model:

The vehicle temperature and humidity alarm can be equipped with only refrigerator cold storage R temperature and humidity transmitter (model:), with standard signal The wire length is about one meter, and the length of the lead wire can be increased as needed, so that the changes in temperature and humidity of the place can be monitored simultaneously based on the road temperature and humidity configuration.

The vehicle temperature and humidity alarm is composed of sensors, transmitters, detectors, R alarms, alarm monitoring center software, etc.

Second technical performance:

Alarm mode: Each channel of the vehicle temperature and humidity alarm can be set to an alarm mode, and up to three digital temperature sensors can be monitored at the same time. Changes in measured values of voltage, current, pressure or other types of transmitters can also be optionally equipped with MMS camera, incoming call, air conditioner automatic start module, power outage/incoming call, smoke, water immersion, access control and other detectors to expand its application scope. When any alarm is detected, it will Send an alarm text message to the Apple and Android mobile phone alarm monitoring center to describe the cause of the alarm, and dial the preset alarm mobile phone numbers in turn. The receiving personnel can determine the cause and location of the alarm through monitoring data and text message content. The alarm monitoring center can be displayed on the map The alarm position can be displayed and on-site monitoring values can be transmitted immediately. On-site monitoring values can be transmitted back at certain intervals at certain intervals. On-site monitoring values can be transmitted back at fixed points every day. Changes in the measurement values of each channel can be recorded and stored remotely in real time via the Internet via mobile phone or computer. The data can be made into charts for statistics and printing, so that engineering and technical personnel can analyze and study the monitored data. The remote remote control circuit relay can be switched on and off immediately or with a delay through the alarm monitoring center on the mobile phone, Apple and Android phone, and can be set When the alarm occurs, the linkage relay is switched on and off. When the alarm monitoring center software receives the alarm information, it will display the alarm time, content, alarm phone number, contact person, contact phone number, address and other relevant information on the computer screen, and automatically store this information on the computer hard drive so that Query or print in the future to improve the management of alarm reception.

Temperature sensor:

Monitoring temperature: ℃ ~ + ℃.

Measurement accuracy ℃.

Signal output: digital type.

Temperature transmitter:

Monitoring temperature: ℃ ~ + ℃. Products in other temperature ranges can be customized.

Measurement accuracy ℃.

Signal output: ~.

Humidity transmitter:

Monitoring humidity: ~% R.

Measurement accuracy ℃.

Signal output: ~.

R alarm:

It has a digital temperature sensor interface and an analog data interface.

Each channel can set the upper limit alarm value and lower limit alarm value which relay will be linked when an alarm occurs.

It can identify short-circuit trigger alarms and circuit open-circuit trigger alarms (factory default). It can also be set to have the same triggering method for all circuits. Each circuit can edit its own alarm text message content.

Each alarm mobile phone number can be stored separately, and incoming calls, text messages and instructions from other numbers can be rejected. Alarm methods can be selected: SMS + MMS + phone call, SMS + MMS, SMS + phone call (factory default), MMS + phone call, only send SMS, only send MMS, only make phone calls, only sound the alarm (buzzer needs to be configured separately) ).

The sound from the scene can be heard when receiving an alarm.

You can use your computer to make phone calls or send text messages to immediately send back on-site monitoring values

You can use your computer or send text messages to set a certain period of time to send back on-site monitoring values.

You can use a computer or send a text message to set up a fixed point to send back on-site monitoring values every day, up to a maximum of times a day.

You can use your computer to make phone calls or send text messages to remotely control the circuit relay (contact capacity) to turn on or off immediately. Through the software, the default relay can be changed from immediate on and off to immediate on and delayed automatic shutdown, which is suitable for automatic remote reset of some equipment, and automatic shutdown of power equipment after remote opening for a period of time.

You can use a computer or send a text message to set a certain relay to turn on and off at a certain time interval.

You can use a computer or send a text message to set a certain relay to be on and off at a certain time every day.

You can use your computer to make phone calls or send text messages to remotely control the host to arm, disarm, switch, siren, etc.

Text messages can be sent to set up an audible alarm or a silent alarm.

Working voltage:.

Working environment: temperature ℃ ~ + ℃, relative humidity % R.

Alarm monitoring center:

You can set the monitoring type to monitor the upper and lower limit alarm values of the range.

When an alarm message is received, the monitoring value, alarm time, alarm content, alarm location, name of the responsible person, contact number, contact address and other relevant information will be displayed on the computer screen, and this information will be automatically stored on the computer hard drive. Alarm data can be queried and printed.

You can add, delete and modify information such as location name, name of person responsible, contact number, contact address, etc.

All functions of the alarm can be set and modified remotely through the computer network.


Contact us:
Beijing Fengsu Wind Direction Technology Co., Ltd.
Mobile:
Telephone:
:
Contact person: Zhang Ms.
WeChat: @b