Supply of 24V water pump dedicated to constant temperature and humidity chamber

Advantages of brushless DC water pump (new magnetic isolation pump)
The magnetic pump is a kind of non-contact torque transmission through magnetic transmission, thereby replacing the dynamic seal with a static seal, so that the pump can completely solve the problem of running, popping, dripping and leaking. The problem eliminates the safety hazards of flammable, explosive, toxic and harmful media leaking through pump seals in the refining and chemical industry, effectively ensuring the physical and mental health of employees and safe production.
Compared with motor-type brushless DC water pumps, magnetic pumps have the following advantages:
． The pump shaft changes from a dynamic seal to a closed static seal to completely avoid medium leakage. It is amphibious and completely waterproof.
． The elimination of independent lubrication and cooling water reduces energy consumption.
． Low power consumption, high efficiency and damping and vibration reduction function reduce the impact of motor vibration on the pump and the impact on the motor when cavitation vibration occurs in the pump.
． When overloaded, the rotor will slip on the ceramic shaft, which protects the motor and pump
. The brushless DC water pump uses electronic components for commutation and does not require the use of carbon brushes for commutation. It uses high-performance wear-resistant precision steel shafts and shaft sleeves. Integrated with the magnet through injection molding, wear and tear is avoided, so the service life of the brushless DC magnetic water pump is greatly enhanced. The stator and rotor parts of the magnetically isolated water pump are completely isolated. The stator and circuit board parts are potted with epoxy resin and % waterproof. The rotor part uses permanent magnets. The body of the water pump is made of environmentally friendly materials. It has low noise, small size and stable performance. Various required parameters can be adjusted through the stator windings to operate at a wide voltage range.
Advantages: long life and low noise, which can be below d and can be used for hot water circulation. The stator and circuit board of the motor are encapsulated with epoxy resin and are completely isolated from the rotor. They can be installed underwater and are completely waterproof. The shaft of the water pump is made of high-performance precision steel shaft with high precision and good shock resistance.
< Working principle of brushless DC water pump (magnetic pump)
The magnet and impeller of the brushless DC magnetic drive pump are injection molded into one body to form the rotor of the motor. In the middle of the rotor, there is a directly injection molded bushing through a high-performance ceramic shaft. The stator and circuit board parts of the motor fixed in the casing are potted in the pump body with epoxy resin glue. There is a thin-wall isolation between the stator and the rotor without the need for a traditional mechanical shaft seal, so it is completely sealed. The torque of the motor is generated by energizing the coil on the silicon steel sheet (stator) to generate a magnetic field that drives the permanent magnet (rotor) to operate. Carry out (even number) stage magnetization on the magnet so that the magnet parts form a complete coupled magnetic system. When the magnetic poles generated by the stator coil and the magnetic poles of the magnet are opposite to each other, that is, the displacement angle between the two magnetic poles = at this time, the magnetic energy of the magnetic system is the lowest. When the magnetic poles rotate to the same pole and opposite to each other, that is, the displacement angle between the two magnetic poles = / at this time, the magnetic energy of the magnetic system is the lowest. The magnetic energy of the system is maximum. After the external force is removed, the magnetic force of the magnetic poles of the magnetic system will repulse each other and the magnet will return to the state with the lowest magnetic energy. Then the magnet moves to drive the magnetic rotor to rotate.
The brushless DC water pump uses electronic commutation without the need for carbon brush magnets. The rotor and stator silicon steel sheets have multi-level magnetic fields. When the magnet rotor rotates an angle relative to the stator, it will automatically change the direction of the magnetic pole so that the rotor always maintains the same level of repulsion. The brushless DC magnetic isolation pump has higher speed and efficiency.
The stator and rotor of the magnetic isolation pump are completely isolated, which completely avoids the liquid leakage problem of traditional motor-type brushless DC water pumps. It can be fully submersed and completely waterproof, which effectively improves the service life and performance of the pump.

Scope of application:
Can be used in computer water-cooling systems, solar fountains, desktop fountains, handicrafts, coffee machines, drinking machines, tea brewers, wine pourers, soilless cultivation showers, bidet washers, tooth cleaners, water heaters, pressurized water heating Mattresses, hot water circulation, swimming pool water circulation, filtration, foot washing, surfing massage basin, surfing massage bathtub, car cooling circulation system, oiler, humidifier, air conditioner, washing machine, medical equipment, cooling system, bathroom products.


Contact Us
Warm reminder: Non-standard products can be customized to meet customer requirements according to customer requirements.
The product is delivered to your door for free and comes with a one-year warranty and free fragile and vulnerable parts.
Hello dear customer! Thank you very much for your attention and support to our company. The approximate parameters of the constant temperature and humidity test chamber are as above. If you want to know the updated detailed parameters, please contact us. We look forward to your call. Thank you!
Contact Miss Hu

Telephone:

Fax

Email: @.