Microscope camera MD26

A professional analog camera with high speed, true color reproduction, automatic white balance, clear image quality, easy and flexible operation. It is a camera that is different from ordinary network interfaces. It can support three output modes and can be directly The high-end digital camera that displays video images on the monitor can be completed by connecting the microscope, computer and monitor without the participation of the computer host. The maximum resolution of real-time preview is pixels, and the frame rate of dynamic display can be up to 100 pixels. It can support smaller resolutions, faster preview speed, and can support simultaneous output of analog signals and digital signals. The hardware uses low-noise, high-dynamic-range sensors to ensure perfect visual quality.
Introduction to the operation interface
①Switch/
Power-on function, turn on the power directly, the light will be on, turn on
Shut-down function, unplug the power to shut down, the light will go out
②Power socket DC volt power interface
③Video interface Computer standard video interface
④After the interface is turned on, plug in the cable and you can see the image from the computer port
⑤Menu five-way key operation area
Operation tips
Key operation instructions
Before entering the menu, the five keys are used as shortcut keys. The button is for zooming in and the button is for zooming out. The button is for automatic exposure function, and the button is for automatic white balance function key. The button functions as a menu entry.
Menu Operation Instructions
After entering the main menu, move the up and down buttons to move the selection items. After confirming that a function is selected, operate the left and right buttons to enter the function operation.
Display settings
Contrast The contrast value of the image
The brightness value of the brightness image
The sharpness value of the sharpness image
The saturation value of the saturation image
Resolution: The resolution of the output image, supports *, * (factory setting), * and * four resolutions. Select the resolution to be output by left and right, press the button to enter the image interface and select save. Press and hold the button for nearly a second to display the resolution switch successfully, otherwise it will not be successful. Returning means not saving and reverting to the previous resolution. (Note that if the current resolution is the same as the selected resolution, the picture selection interface will not be entered. When the image is frozen, switching the resolution will return to the dynamic image! Switching the resolution will also delete the saved picture)
Press the return button or press the left and right buttons to confirm and exit
Camera settings
Language menu language, supports English and Simplified Chinese (default language is English)
Strobe light source frequency adaptation, used to eliminate power frequency flicker. Supports both Hertz and Hertz frequencies.
Exposure Automatic exposure switch, when the automatic exposure is keyed, it will no longer expose after one exposure. When it is automatic, it is in the automatic exposure state (note that if the shortcut key selects automatic exposure, it will also change the status of this menu to automatic).
Press the left and right keys to enter the default settings, select the menu up and down, and use the left and right keys or keys to determine whether to restore to factory defaults. All parameters and functions will be restored to factory default settings (the output resolution will not be restored to), and restored to dynamic images.
Press the return button or press the left and right buttons to confirm and exit
Color settings
The image has color mode, monochrome mode, and negative mode
The red gain of the red gain camera defaults to the gain ratio of is
Green Gain The green gain of the camera, which defaults to a gain ratio of
Blue Gain The blue gain of the camera, which defaults to a gain ratio of
White Balance Keying is white balance once , automatic will always be in the white balance state, and the color gain will return to the single state under white balance (note that if the shortcut key selects automatic white balance, it will also change the status of this menu to automatic)
Press the return button or press the left and right buttons to confirm and exit< br/> Line mark settings
Line coordinate line selection, there are six in total (note that after the cross cursor is turned on, there are only four)
Line mark Line mark can change the horizontal and vertical status of the line, the default value is horizontal.
Line switch turns on and off the currently selected coordinate line
Line color sets the color of the coordinate line and the color of the cross cursor
Line size selects the size of the current line
The line position can be determined by pressing the left and right buttons The moving position is saved when there is a power failure, so there is no need to reset it next time you turn on the phone.
Press the return button or press the left and right buttons to confirm and exit
Function settings
Freeze the frozen image
Compare the left and right of the image
Mirror the image left and right
Invert the image up and down Reverse
Noise reduction reduces image noise
Press the return button or press the left and right buttons to confirm and exit.
If there are only freeze, mirror and reverse functions
Cross setting
Cross switch turns on or off the cross cursor
Cross color selects the color of the cursor and line
Return button or Press the left and right buttons to confirm and exit the project. Detailed parameters/model model. Camera type. Color digital camera. Sensor type (magnesium). Sensor size. Effective pixel scanning method. Progressive scan. Spectral response. Signal-to-noise ratio. Filter. Infrared blocking sheet. Data interface. / Shutter type. Electronics. Shutter sensitivity./() Pixel size/conversion frame rate data interface image size output speed * * * * * *
() exposure mode automatic exposure white balance mode automatic white balance working temperature & + control saturation, contrast , brightness supports protocol standards, camera interface type standard interface operating temperature ℃ ~ ℃ power supply (current) supports system, / application fields such as industrial quality control, teaching research, material analysis, clinical inspection, machine vision and other camera feature output driver-free. Freeze image function contrast function measurement function contrast noise reduction mirror rotation application fields industrial quality control, teaching research, material analysis, clinical inspection, machine vision, etc.