Closed coal hopper gate Manual closed coal hopper gate

Closed coal hopper gate Manual closed coal hopper gate
Electric closed coal hopper gate
The manual closed coal hopper gate is composed of shell, gate plate, sprocket, large gear, transmission and other axial parts.
The electric closed coal hopper gate is composed of a shell, a gate plate, an electric device, a transmission shaft and other parts.
.The gate movement is changed to the rack and pinion movement. The coal hopper gate is mainly used for boiler maintenance or to control the flow of coal. It is not normally open or normally closed. The movement of the original gate gate plate is caused by the screw rod, which will rust, causing the gate plate to not open and close properly and lose its function. r The gate movement of the closed coal hopper gate is changed to a gear rack driven by a gear rack. The contact range of the gear rack is very small, and it will rust together after long-term use, which reduces the resistance to opening and closing.
The gate track is set on eighteen sets of supporting rollers. The gate track of the original gate was made of two angle steels. After the coal fell from the upper opening, it was inevitable that a lot of coal pieces and shavings would get stuck in the track, causing the gate to fail to open and close. r The gate track of the closed coal hopper gate is a round roller gate installed on the inside of the gate. After the coal falls from the upper opening on the roller, there will be no coal and coal chips. The track can be stuck and the gate plate will move on the roller. The opening and closing force is naturally much smaller and it is light and flexible.
The gate is closed in shape. r The coal hopper gate is sealed around it to avoid flying coal dust. It has dust-tight performance and can meet the requirements of my country's environmental protection regulations.
This gate has five specifications, each of which is divided into four types of combinations.
<= dd
Specifications:
Album number:






< br/>









Combination form:
Code number of square inlet and opposite outlet: Garden inlet and opposite garden outlet Code:
Square inlet and opposite outlet code: Garden inlet and opposite outlet Code: D
Example of marking code:
Choose a closed coal hopper gate with the feed port opposite to the discharge port. Then mark it as.
Choose a closed coal hopper gate with the feed port facing the discharge port. It is marked as D.
The company's main products:
D
Electric push rod
D
Electro-hydraulic push rod
Electro-hydraulic palatal gate, electric jaw gate Electro-hydraulic corner device driven inlet material opening size
Electro-hydraulic push rod driven electro-hydraulic push rod flat gate valve Electro-hydraulic corner device driven inlet material opening size
Electro-hydraulic push rod driven electro-hydraulic push rod flat gate valve
Electro-hydraulic corner device drive
Inlet opening size electro-hydraulic push rod drive
Electro-hydraulic push rod flat gate valve
Steel wire rope core stripping machine
Electric push rod
D
Electric push rod
D
Electro-hydraulic push rod
Explosion-proof push rod
D
Jaw gate
Electro-hydraulic Moving sector gate
Belt stripping machine
Wire rope stripping machine
Single side unloader
Double side unloader
DD
Type broken belt catcher Catcher
Broken belt catcher for belt conveyor
Broken belt protection device Broken belt catcher
Layered belt stripping machine
Belt conveyor deflector
Chain type one-way deflection adjuster
Fully automatic deflection adjuster
Variable groove angle unloader
Electro-hydraulic unloader
Plough type unloader
Contact person: Ji Xueqin
Mobile phone
Telephone:
Fax:
Ali Wangwang:
Email
:@.
Closed coal bucket gate