Anyuan DYTP electro-hydraulic push rod parallel electro-hydraulic push rod

Electro-hydraulic push rod
Parallel electro-hydraulic push rod
Corner type electro-hydraulic push rod
Electro-hydraulic push rod manufacturer
Electro-hydraulic push rod, that is, electric< br/>Pneumatic hydraulic push rod is suitable for reciprocating push-pull linear motion or reciprocating rotation at a certain angle. It can be used in places where work objects are raised or lowered or clamped. It can also be used in remote and high-altitude dangerous areas, and can be connected to a computer for centralized programming. control. Now it is widely used in metallurgy, mining, coal, electric power machinery, food, cement, chemical industry, water conservancy and transportation and other departments. It is an indispensable universal power source. Working Principle
The electro-hydraulic push rod uses an electric motor as the power source, and the electric motor rotates forward and reverse, so that the hydraulic oil outputs pressure oil through the two-way gear pump, and is sent to the working cylinder through the oil circuit manifold to realize the reciprocation of the piston rod. sports. Advantages
It has automatic overload protection function. When the electro-hydraulic push rod is working, if the external force on the piston rod exceeds the rated output force or the piston has reached the end point, the motor is still rotating. At this time, the oil pressure in the oil circuit increases to the set value. pressure, the relief valve overflows quickly and accurately to achieve automatic overload protection. Although the motor is rotating, it will never burn out. Self-locking function A pressure self-locking mechanism is designed in the oil circuit integrated block of the electro-hydraulic push rod. When the motor stops rotating, the piston rod immediately stays in a certain position, and the pressure oil is in a pressure-maintaining state. Stepless adjustment can be carried out within the rated speed output force and stroke range according to user requirements.
Description of shape The electro-hydraulic push rod is mainly composed of six basic elements including the type of push rod, motor protection level, rated output force, stroke, rated speed and angle of use. It can also be equipped with three adjustment functions according to the special requirements of the customer. That is, speed adjustment, push-pull force adjustment, stroke adjustment, and stroke switch positioning. Except for the above three adjustment functions, which must be clearly stated when ordering, please refer to the model preparation method and fill in the six major elements carefully. Parallel electro-hydraulic actuator technical parameter selection r//r/~_ __ />
Precautions during installation and use

The electro-hydraulic actuator must be installed with sufficient space and environment High temperature environments between temperatures require special ordering.

Users can configure the limit switch according to control needs.

Put the electro-hydraulic push rod flat on the ground before installing it. Inject the hydraulic oil brand and accuracy grade and the oil level should be at the lower edge of the observation port. The oil level of the split push rod should be within the box.

The exhaust screw ring of the exhaust hole should be loosened before use.

Try booting the computer during installation.

Integral push rod, connected to the power supply, it can operate
b
Split push rod, connected to the power supply, allows the cylinder to reciprocate several times without load to make the cylinder and The air in the oil pipe is discharged and the load is put on it
Maintenance of the electro-hydraulic push rod

In order to ensure the service life of the high-pressure oil pipe, the oil pipe must be fixed with rubber.

Hydraulic oil should be filtered or replaced regularly, once a year or according to the actual work.

If it is not used for a long time, the insulation of the motor should be checked before putting it into use.

Simple troubleshooting

It cannot operate when it is first installed. Check that the motor is not running or there is insufficient oil.
b
If it cannot operate after being used for a period of time, remove the hydraulic control plug, clean the spool of the hydraulic control valve, and replace the hydraulic oil.
After being used for a long time, the push rod can be pushed and pulled without load, but cannot stand with load. Replace the seal for the upper hole of the piston in the cylinder. If the sealing surface leaks, replace the seal. If oil drips from the extension of the oil plug rod, replace the shaft seal.
The main products of our company
Electric push rod
Electric hydraulic push rod
Electro-hydraulic jaw gate Electric jaw gate Electro-hydraulic corner device drive Import material opening size
Electro-hydraulic push rod drivenElectro-hydraulic push rod
Flat gate valve
Steel wire rope core stripping machine
Electric push rod
Electric push rod
Electro-hydraulic push rod< br/>Explosion-proof push rod
Jaw gate
Electro-hydraulic sector gate
Belt stripping machine
Wire rope stripping machine
Single side unloader
Double-side unloader type broken belt catcher
Broken belt catcher for belt conveyor
Broken belt protection device belt broken catcher
Layered belt stripping Layer machine
Belt conveyor deflector
Chain type one-way deflector
Fully automatic deflector
Variable groove angle unloader
Electro-hydraulic unloader Feeder
Plow type unloader
Contact Ji Xueqin
Mobile phone

Telephone
Fax
Aliwangwang
< r@ Email
@ B plus travel switch/>