Year1
- 产地：
- 台湾
- 型号：
- PG60L1-10-14-60
- 平均使用寿命：
- 20000小时
- -
.
Taiwan Jusheng enlarged flange reducer is a special reducer for servo motors in the reducer family. It is widely used for its small size, high transmission efficiency, wide deceleration range, high precision and many other advantages. Used in servo, stepper, DC and other transmission systems. Its function is to reduce the speed, increase the torque and reduce the load/motor inertia ratio on the premise of ensuring precision transmission. In the past few years, some users have broken the output shaft of the reducer due to illegal installation and other human factors when using servo reducers, causing unnecessary losses to the company. Therefore, in order to better help users make good use of the reducer, I will introduce to you in detail how to correctly install the servo motor reducer.
The correct installation, use and maintenance of servo motor reducer is an important part of ensuring the normal operation of mechanical equipment. Therefore, when installing the Jusheng reducer, be sure to assemble and use it in strict accordance with the following installation and use related matters.
The first step before installation is to confirm whether the motor and reducer are intact and strictly check whether the dimensions of the parts connecting the motor and reducer match. Here are the positioning bosses, input shafts and servo motors of the motor. Dimensions and fitting tolerances of reducer grooves.
The second step is to unscrew the screw on the dust hole on the outside of the flange of the enlarged flange servo reducer. Adjust the system clamping ring so that the side hole is aligned with the dust hole, insert the inner hexagon and tighten. Then remove the motor shaft key.
The third step is to naturally connect the motor and reducer. When connecting, it must be ensured that the concentricity of the output shaft of the reducer and the input shaft of the motor is consistent and that the outer flanges of the two are parallel. Inconsistent concentricity may cause the motor shaft to break or the reducer gear to wear.
In addition, it is strictly forbidden to hit with a hammer during installation to prevent excessive axial or radial force from damaging the bearing or gear. Be sure to tighten the mounting bolts before tightening the force bolts. Before installation, wipe the anti-rust oil on the motor input shaft, positioning boss and reducer connection parts with gasoline or zinc-sodium water. Its purpose is to ensure the tightness of the connection and the flexibility of operation and to prevent unnecessary wear.
Before connecting the motor to the Jusheng servo motor reducer, the motor shaft keyway should be vertical to the tightening bolt. To ensure uniform stress, first screw on the mounting bolts at any diagonal position but do not tighten them, then screw on the other two mounting bolts at diagonal positions, and finally tighten the four mounting bolts one by one. Finally tighten the force bolt. All tightening bolts need to be fixed and inspected with a torque wrench according to the indicated fixed torque data.
The newly upgraded Jusheng reducer currently has a large series:---- (Right Angle Type) (Right Angle Type) The new right angle reducer welcomes new and old customers to come and ask for the latest catalog
WhatsApp
