Year1
- 产地：
- 台湾
- 型号：
- MF40XL1-5-K-8-30
- 平均使用寿命：
- 20000小时
- -
.
Installation method of Taiwan Jusheng reducer:
Apply a little anti-rust oil to the motor output shaft and flange
If any When placing the shaft sleeve into the input shaft of the Jusheng micro servo reducer, note that the grooves on the shaft sleeve must be aligned with the grooves on the input shaft of the deceleration.
Place the motor to be installed on the platform with the motor output axis upward, then secure the motor and remove the key.
Align the groove on the input shaft of the reducer with the key groove on the motor and slowly slide it in.
Lock the fixing screw on the input shaft of the Jusheng servo reducer with the first torque.
Tighten the fixing screws of the motor and micro servo reducer.
Increase the torque evenly and gradually (three times) to tighten the fixing screws on both sides of the input shaft of the reducer.
Please do not hit the output shaft of the servo motor reducer with gravity to avoid damaging the internal mechanism of the reducer.
At present, micro servo reducer products have occupied most of the market share in Taiwan, Europe and the United States, and have gradually entered various countries and regions in Asia. Jusheng Industrial Co., Ltd. has been producing high-precision micro reducers for servo motors since the year. Years of experience accumulation, innovation and improvement have made the reducers produced by Jusheng Industrial Co., Ltd. in the leading position in the industry in many aspects. It has become one of the most famous micro servo reducer manufacturers in the world in terms of technology and market occupancy. one. Today, in every part of the world, cost-effective servo reducers are the first choice for users when choosing reducers.
Jusheng micro servo reducer has high precision, high torque, high rigidity, high load, high efficiency, high speed ratio, long life, low inertia, low vibration, low noise, low temperature rise, precise positioning, appearance Exquisite, small and lightweight, can be installed at will, etc. Suitable for speed increase and deceleration transmission of AC servo motors, DC servo motors, stepper motors, hydraulic motors, ordinary motors, etc. Suitable for connection of drive products manufactured by any manufacturer in the world, such as: Panasonic, Mitsubishi, Yaskawa, Sanyo, Omron, Fuji, Delta, TECO, Siemens, Schneider, Handebo, Tamagawa, Falak, Tomita, Guangshu, Hua Shu Da, Yuhai, Xinjie, Dongling, Yingmaike, Bomed, Onok, Yingweiteng, Chaotongbu, Baishan, Leisai, Yankong, Shanshe, Shinano, Tuoda, etc.
Japanese servo brands: Panasonic servo motor special reducer Mitsubishi servo motor micro reducer Yaskawa servo motor reducer Fuji servo motor reducer Sanyo servo motor reducer Hitachi servo motor special reducer Oriental servo motor micro reducer Machine Omron servo motor reducer Tamagawa servo motor reducer Keyence servo motor reducer Shinano servo motor special reducer Toei servo motor micro reducer Miki servo motor reducer Toshiba servo motor special reducer Fanuc servo motor micro speed reducer Machine Kobelco servo motor special reducer Esdick servo motor reducer Yamaha servo motor reducer Yokogawa servo motor special reducer Toyo servo motor micro reducer
Features of micro servo reducer:
< br/> High positioning accuracy: The micro servo reducer adopts precision grinding gear tooth surface with smooth and accurate tooth shape. The gear box, bracket and overall structural design are made of strong materials to ensure high stability and strict quality control.
Second high torque: The special reducer for servo motor uses high-quality tapered bearings to enable the output shaft to withstand greater axial and radial loads. In addition, the gear box and bracket are made of strong materials and have an overall structural design.
Three high starting properties: Due to the balanced characteristics of the spur gear structure and high precision and low inertia moment, it can have high starting properties.
4. Low noise: The precision ground gear tooth surface is highly precise and smooth, making the gear run smoothly and with low noise. Use selected lubricating oil: German-made selected synthetic lubricating oil is used instead of the grease lubrication used in general micro-servo motor special reducers. Due to its good fluidity, the gears can operate under sufficient oil film protection to reduce noise.
Five low tooth backlash: Under precise processing and strict quality control, the standard tooth backlash is ~ arc minutes in one section and ~ arc minutes in two sections. The precision tooth backlash is ~ arc minutes in one section and ~ arc minutes in two sections. Lower backlash can be customized if necessary.
Six easy installation: The connecting plate and input shaft hole size of the micro servo reducer are designed to be flexible so that the reducer can be combined with the servo horses of various brands.
Seven long lifespan and maintenance-free: Precision ground gears are made of high-grade nickel-chromium-molybdenum alloy steel, which is hobbing and deep carburizing and hardening, and then tooth surface grinding to make the gears highly rigid and smooth and wear-resistant. Good sex. The micro servo reducer uses high-quality German-made synthetic lubricating oil, which has good fluidity and is rich in extreme pressure anti-pressure agents, so that the various parts in the gear box are fully lubricated and protected. The use of Japanese high-quality non-perishable oil seals ensures good sealing performance. Western European famous brand tapered bearings are used to bear the maximum axial and radial load. The synergy of the above excellent quality makes the micro reducer specially used for servo motors long-lasting and maintenance-free.
WhatsApp
