TWD helical gear reducer

产地：

台湾

型号：

TSF040L2-20-8-30

平均使用寿命：

20000小时

Taiwan Servo Planetary Reducer Helical Gear Reducer Low Backlash Reducer Helical Gear Planetary Reducer Servo Reducer Servo Motor Reducer Servo Planetary Reducer Taiwan Helical Gear Reducer Taiwan Planetary Reducer. Ready-stocked Taiwan D helical planetary reducer ---Adaptation~ The single support structure of the servo motor is suitable for single-direction operation.
- -
.
Taiwan servo planetary reducer selection and precautions:

The servo helical gear reducer has high applicability and can maintain the working coefficient. Above But you can also decide according to your own needs in selection. There are two key points:
The output shaft diameter of the servo motor should not be larger than the maximum shaft diameter on the table.
If the working torque calculated by torque can meet the normal operation but there is insufficient when the servo output is at full output, we can perform current limiting control on the driver on the motor side or perform torque protection on the mechanical shaft. This work is absolutely necessary.

Other precautions for servo planetary reducer:
Installation site: Confirmation of oil product: When ordering, the softened oil of this type of product is semi-solid and does not require oil change, but it must be noted that the temperature is below ℃ Please inform us in advance so that antifreeze can be added. We must also be informed to install additional protective measures in acid and alkali places.
Servo motor: When ordering, the factory should be informed of the required connecting flange and shaft dimensions of the servo motor.
Installation of helical gear reducer: The servo reducer body is a very precise product, so care must be taken during installation to strictly prohibit impact or hammering on the axis or any part.

Taiwan planetary reducer lubrication:
Taiwan planetary reducer is a sealed design and does not require oil change.
The oil is a semi-solid high-grade synthetic oil
Ambient operating temperature: ~+℃
The maximum allowable temperature of the Taiwan servo planetary reducer body is below ℃
Note: Order when the working temperature is below ℃ It must be clearly stated before

Quality guarantee for purchasing servo planetary reducer:
The planetary reducer is guaranteed for one year from the delivery date under normal use.
It has a two-year oil leakage warranty under normal use.
Note: Man-made or natural disasters are not covered by the warranty.

Installation instructions for Taiwan servo planetary reducer:
Installation sequence of servo planetary reducer and servo motor:
Install the servo motor output shaft into the input shaft of the helical gear reducer
br/> Tighten the screws (the connection between the servo and the reducer)
Tighten the screwdrivers on the left and right sides evenly
Tighten the torque wrenches on both sides
Insert the protective cover In the screw hole of the reducer

Installation method of helical gear reducer:

Apply a little anti-rust oil to the motor output shaft and flange.
If there is a bushing, when placing it into the input shaft of the helical gear reducer, pay attention that the groove on the bushing must be aligned with the groove on the input shaft of the servo planetary reducer.
Place the motor to be installed on the platform with the motor output axis upward, then secure the motor and remove the key.
Carefully align the groove on the input shaft of the servo reducer with the key groove on the motor and slowly slide it in.
Lock the fixing screw on the input shaft of the Taiwan servo planetary reducer with the first torque.
Tighten the fixing screws of the motor and reducer.
Increase the torque evenly and gradually (three times) to tighten the fixing screws on both sides of the input shaft of the helical gear reducer.
Please do not hit the output shaft of the reducer with gravity to avoid damaging the internal mechanism of the servo planetary reducer.