Year1
- 齿数：
- 11-44
- 功 率：
- 0.18KW～15KW
- 转 矩：
- 1.5N·m～2062N·m
Specialized planetary gear reducer for cooling tower
Specialized planetary gear reducer for cooling tower is the specialty of the company's cooling tower reducer. It is a special reducer for cooling tower that has been improved and optimized.
Special planetary gear reducers for cooling towers are now widely used in ultra-low noise cooling towers. The noise value has reached the level of belt reducers. It has unparalleled advantages of belt reducers in reliability, transmission efficiency, maintenance costs, etc. Advantages: It is an ideal reducer for ultra-low noise cooling towers.
Type flip-chip cooling tower special reducer is an updated special cooling tower reducer designed and exclusively developed and produced in China by our factory. The reducer is installed below the fan, cooling tower reducer, and above the water outlet pipe. , the weight of the reducer, fan and other parts is no longer borne on the tower body, avoiding the deformation of the tower body due to long-term pressure and reducing the overall noise of the tower. This product is a national patent product.
Jiuzhong Reducer Company specializes in the production of cooling tower reducers and planetary gear reducers.
Specific models of cooling tower reducers, , , , , special reducers for cooling towers. The above models are all supplied from stock by Jiuzhong Company, with a one-year warranty. Welcome to consult.
Before installation, check whether the reducer and fan match the design requirements. The reducer should generally be hoisted as a whole. If it is lifted separately, attention should be paid to the fact that the steel ball in the spindle taper hole cannot be missed or moved, otherwise the machine parts will be damaged.
. A thick rubber pad should generally be used between the reducer and the mounting frame to reduce vibration.
After installation, check that the gap between the fan blades and the tower body should be uniform, and the fan should be able to rotate flexibly without sticking when turned by hand, otherwise it cannot be powered on and run.
, Must be refueled before operation. The special planetary gear reducer for type cooling towers uses hyperbolic gear oil or gear oil. Ordinary mechanical oil cannot be used, otherwise the service life will be reduced. When refueling, introduce it from the refueling pipe. After refueling, the oil level can reach the middle line, and then cap the oil needle tightly. This machine uses a transmission shaft to place the motor outside the hairdryer, which improves the working environment of the motor. Equipped with an oil mark outside the tower, oil filling and draining pipelines, and ball valves, the oil level can be checked without stopping the machine and refueled in a timely manner. Motors generally use multi-speed motors such as pole or /stage motors, and pole-equipped motors can also be used. The gear transmission adopts a pair of bevel gears and a pair of helical cylindrical gears. The tooth surfaces are all hard tooth surfaces. The lubrication method is oil immersion or oil throwing. The transmission shafts have undergone dynamic balance tests and both ends are elastic sleeves
The pin coupling ensures the smoothness of transmission, good buffering and vibration damping, and is suitable for the environment inside the tower. When the ambient temperature is low and the lubricating oil is close to solidifying, the base must be heated and melted before it can be started.
,,
,,,,
,,,, ,
Special reducer for cooling tower, cooling tower reducer.
Jiuzhong Machinery specializes in the production of cooling tower reducers, planetary gear reducers
Product introduction of low-noise planetary gear reducers
Type cooling tower reducers, which are involute planetary gear transmission Type, it has the characteristics of compact structure, light weight, good sealing performance, strong bearing capacity, high efficiency, beautiful appearance and easy maintenance. The low-noise reducer was produced and accepted in accordance with the "Type Involute Cylindrical Wheel Reducer Weight/Standard". Load tests were carried out one by one before leaving the factory. The noise and motor insulation were strictly tested and recorded, thus ensuring product quality.
,,
The series of reducers have the following characteristics
, high transmission efficiency, energy saving, designed using advanced planetary transmission principles, high manufacturing precision, and transmission efficiency of more than %.
. Low noise and high gear grinding accuracy. The internal design of the reducer has a noise isolation structure, which effectively controls the noise of the reducer and meets the needs of supporting ultra-low noise cooling towers.
, beautiful appearance, small size, motor and reducer adopt the integral coaxial transmission method, with beautiful appearance. The structure design is compact, and the volume is about one-fifth less than similar domestic products.
, good sealing and reliable performance. Special sealing method is used to ensure that the lubricating oil does not leak. The gears are made of high-strength alloy steel with large load-bearing capacity and good reliability.
Cooling tower reducer Cooling tower reducer Cooling tower special planetary gear reducer
Reducer reducer, ,
,,,,,,
Light weight, small size, and Compared with commonly used cylindrical gear reducers, the weight is reduced/more, and the volume can be reduced/~/.
The transmission efficiency is high, with single-stage up to %, two-stage up to %, three-stage up to %, and the transmission power range is wide, from kilowatts to kilowatts.
Using hard tooth surface, long service life and wide applicability.
Factory address Liying Industrial Park, Rencheng District, Jining City, Shandong Province
Consultation phone number
Online
WhatsApp
