Special reducer for robotic arm

产地：

台湾

型号：

TTRAD-165E-201

平均使用寿命：

20000小时

Special reducer for robot arm. Taiwan roller reducer. Ultra-precision reducer. Special roller reducer for robot arm. Taiwan Murata reducer. Robot arm roller reducer. Murata roller reducer. Ultra-precision roller reducer. Taiwan ultra-precision reducer. Murata Precision Reduction. Taiwan's Murata ultra-precision roller reducer, specially designed for mechanical arms, has a high output torque and high holding torque. It is ultra-precise and has a minimum backlash as low as arc minutes.
<=_
- -
Features of Taiwan Murata roller reducer:

Novel transmission and unique advantages:
Taiwan roller reducer has The fixed gear with circular pin teeth in the balance transmission without a balance wheel has the advantages of harmonic gear transmission without a flexspline. The ultra-precision roller reducer has a small tooth difference. The planetary transmission has a large transmission ratio without interference and has nutation transmission carrying capacity. Great advantage without nutating the transmission.

Minimal sliding and the highest efficiency:
Since the meshing parts of Murata roller reducer are all rollers, the whole system is basically sliding with rolling, and the mechanical loss is minimal, so extremely high gear transmission can be obtained The efficiency of single-stage roller reducer can reach up to about %.

Smooth operation and low noise:
Multi-tooth meshing overlap coefficient and large robot arm special roller reducer double-row structure mechanism balances rolling and side clearance to avoid gear tooth interference and cause mechanical vibration and noise is limited to a minimum.

The transmission accuracy error is small:
Because the multi-tooth meshing tooth errors of the roller reducer can compensate for each other, the transmission error value is only % of the gear reducer.

Larger shock wave diameter and higher output:
Due to the characteristics of the shock wave law of Taiwan roller reducer, the shock wave diameter of roller wave transmission is generally larger than that of other planetary transmission mechanisms, so Murata Super The allowable transmission torque of precision reducer is also higher.

Large transmission ratio and compact structure:
The transmission ratio of Taiwan Murata roller reducer is the number of rollers on the roller plate, so a single-stage transmission can obtain a large transmission ratio and ultra-precision reduction. The incoming and outgoing force shafts of the machine are located on the same axis. The structure is streamlined and compact. Compared with gear reducers and worm gear reducers of the same condition, it is lighter in size.

Multi-tooth meshing has large load-bearing capacity:
The number of teeth meshed at the same time in the double-wave structure can reach %. General gear transmission only has about ~ teeth, so the load-bearing capacity of the ultra-precision reducer specially designed for robotic arms is higher than that of gears under the same conditions. Reducers and worm gear reducers come in big sizes.

The roller tooth type has the longest service life:
Murata roller reducer’s original movable tooth mechanism has good craftsmanship, simple processing and low cost. In addition, it has a true round tooth type with strong cohesion and is not easy to chip. It is easy to maintain and has a long lifespan.

Reduced energy consumption and good economy:
Due to the large output of the roller reducer, high efficiency, high energy loss and small workload, the long-term operation has significant economic benefits.

Hollow rollers are simple to output
Some roller teeth are hollow in low-speed ratio transmission. Ultra-precision rollers are economical and can directly output constant speed motion. It not only improves the transmission performance but also simplifies the process. Constant velocity output structure.